CLI305 ® IRED - Phototransistor Photointerrupter Clairex Technologies, Inc. September, 2001 1.322 (33.58) 1.302 (33.07) 0.510 (12.96) 0.442 (11.2) 0.490 (12.45) 0.432 (11.0) 0.510 (12.9) 0.490 (12.4) 0.188 (4.78) nom. RED 0.380 (9.65) 0.370 (9.40) BLUE (3) GREEN (5) 0.260 (6.60) 0.240 (6.10) 1.01 (25.7) 0.99 (25.1) 0.128 (3.25) dia. LEADS ARE #22 AWG, UL1429, 12.0 (304.8) MIN LONG. BLACK YELLOW (4) Case 36 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Epoxy potting contour is not controlled. features • rugged plastic package • hermetically sealed discretes • narrow beam alignment absolute maximum ratings (TA = 25°C unless otherwise stated) storage and operating temperature……….………………………….-55°C to +100°C LED continuous forward DC current…………………………………………………….60mA reverse DC voltage……………………………………………………………………...3V power dissipation(1)………………………………………………………………..100mW OUTPUT TRANSISTOR collector-emitter voltage………………………………………………………………30V (2) maximum continuous collector current ………………………………………..100mA (3) power dissipation ………………………………………………………………..200mW description The CLI305 consists of an IRED and a phototransistor mounted in a black plastic housing. It features 12 inch leads and two holes for bracket mounting in any position. Output notes: is an emitter follower transistor 1. Derate linearly 1.07mW/°C from 25°C free air temperature to TA = +100°C. providing high gain, fast switching 2. 200mA when pulsed at 300µs, 2% duty cycle. speed and TTL interfacing. There is 3. Derate linearly 2.13mW/°C from 25°C free air temperature to TA = +100°C. a 0.005” wide aperture in front of the phototransistor. For assistance, call Clairex. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Input IRED VF IR Forward voltage Reverse current min typ max units test conditions - - 1.5 10 V µA IF = 16mA VR = 3V - 100 nA VCE = 10V, Ee = 0 5 50 0.50 - mA V V µsec µsec Output Transistor (leads 4 and 5) ID Collector-emitter dark current - Coupled IL VO VOFF tr tf note: Sensor current (lead 4) Voltage between leads 4 and 5(4) Voltage between leads 4 and 5(4) Output rise time(4) Output fall time(4) 4. 2.2kΩ resistor between leads 3 and 5. 20 4.7 - IF = 10mA, VCE = 5V IF = 20mA, VCE = 5V Ee = 0 IC = 2.0mA, VCE = 10V IC = 2.0mA, VCE = 10V Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 10/01/04 Plano, Texas 75074-8524 www.clairex.com