ETC D3416

JNPS-0846
目 次 / CONTENTS
1.
頁 / PAGE
機能 ················································································································· 1
FUNCTION············································································································ 6
2.
適合対象 ········································································································· 1
COMPATIBLE OBJECTS ····················································································· 6
3.
関連仕様図 ····································································································· 1
RELATED SPECIFICATION DRAWINGS ························································ 6
4.
関連規格類 ····································································································· 1
RELATED TEST STANDARDS ········································································· 6
5.
適用 ················································································································· 2
APPLICATION ······································································································ 7
6.
品質特性 ······································································································· 3
QUALITY PERFORMANCE················································································· 8
7.
製品上めっき仕様識別表示 ·········································································· 4
PLATING SPEC INDICATION ON CONNECTOR·············································· 9
8.
包装&表示 ····································································································· 4
PACKAGE & IDENTIFICATION ········································································· 9
9.
保管 ················································································································· 5
STORAGE············································································································ 10
10.
注意事項 ········································································································· 5
ATTENTIONS ····································································································· 10
i
JNPS-0846
1.
FUNCTION
This connector is designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch
flat cable. This connector has 2 rows of plural U-elements at topside and 2 rows of contact tails at
bottom side.
Then, this connector has the function of electrical connection between cable and PC board or cable and
compatible IC socket (Plating Suffix : SC or S).
2.
COMPATIBLE OBJECTS
2-1 WIRE ACCOMODATION
28 AWG Stranded *corresponding with UL Style 2651
2-2 COMPATIBLE BOARD
Thickness: 1.6mm ± 0.2mm
Through hole diameter: φ1.0mm ± 0.1mm
* Refer to the drawing 4U-0010-0940-6.
* In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC
board by soldering, more than 0.5mm thickness spacers (ex. plastic washer with high temperature
resistance) should be used for spacing between the connector body and PC board.
2-3 COMPATIBLE IC SOCKET
IS socket should have the compatibility with the following specification of the terminals.
PRODUCT No.
LEAD LENGTH
(X)3406-0000 XX (14Pos.) and
(X)3416-0000 XX (16Pos.)
4.4 ± 0.3mm
* These connectors don't have standoff bumps.
(X)3460-0000 XX (24Pos.)
3.8 ± 0.3mm
* Lower side from the bottom of the standoff
bumps (Height: 0.6mm).
(X)3508-0000 XX (40Pos.)
3.9 ± 0.3mm
* Lower side from the bottom of the standoff
bumps (Height: 0.5mm).
LEAD SECTION
0.46 ± 0.05mm ×
0.36 ± 0.05mm
* IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S.
IC socket can not be used for (X)3XXX-0000 PR.
3.
RELATED SPECIFICATION DRAWINGS
See the drawings described in JNPD-0846.
4.
RELATED TEST STANDARDS
MIL-STD-202
JEIDA-38-1984
JIS C 0050
JNTM-0039, JNTM-0040
*JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts.
6
JNPS-0846
5.
APPLICATION
PRODUCT NUMBER INFORMATION
(X)
3XXX – 0 X 0 0 XX
PLATING SUFFIX
PR : U-ELEMENT AREA & TAIL AREA / Gold Flash Plating
SC : U-ELEMENT AREA / Nickel Plating
TAIL AREA / Gold Plating 0.2µm Min
S : U-ELEMENT AREA / Nickel Plating
TAIL AREA / Gold Plating 0.76µm Min.
SHAPE OF TAIL SECTION
0 : Rectangular Pin (0.46mm × 0.36mm)
CONTACT DISPOSITION
0:
1:
Standard (Body Color : Gray)
Mirror Image Type (Body Color : Black)
CONTACT QUANTITY
3406: 14P (Distance of terminal row : 7.62mm)
3416: 16P (Distance of terminal row : 7.62mm)
3460: 24P (Distance of terminal row : 15.24mm)
3508: 40P (Distance of terminal row : 15.24mm)
BODY COLOR
Blank : Gray
D : Black
(Contact Disposition : Standard)
(Contact Disposition : Mirror Image Type)
7
JNPS-0846
6.
QUALITY PERFORMANCE
6-1 RATING
ITEM
RATING
CURRENT
1.0A
VOLTAGE
AC: 250V Max.
6-2 PHYSICAL SPECIFICATIONS
VIBRATION
MECHANICAL
SHOCK
SOLDERABILITY
/ DC: 300V Max.
-55°C ~ 105°C
TEMPERATURE
TEST
DESCRIPTION
Max.
* The value in (
REQUIREMENT
) is reference.
TEST CONDITION
RELATED
STANDARD
Electrical discontinuity:
Less than 1µs
Sweep Freq.: 10∼55Hz, Amplitude:
1.52mm(or 98 m/s2), Sweep Cycle:
1min., Sweep time: 2 hours Sweep in
each direction: (X,Y,Z)
MIL-STD202F 101A
Electrical discontinuity:
Less than 1µs
490 m/s2, 11ms, Half sine shock pulse.
3 times / X,Y,Z directions (Total 18
times)
MIL-STD202E 213B
Wetting: 95% Min.
or
Zero cross time:
3 seconds Max.
Solder: Sn-3Ag-0.5Cu
- Wetting Measurement:
245°C, 3 seconds
- Wetting Balance Method:
245°C
JNTM-0039
JIS C 0050
Connector should not have
Dip soldering:
260°C, 10 seconds, 2 times or
263°C, 5 seconds, 2 times
* without Pre-heating
Soldering Iron:
Dependence on soldering conditions.
* It need the evaluation
under actual conditions.
JNTM-0040
any defect portions after test.
SOLDERING HEAT
RESISTANCE
8
JNPS-0846
6-3 ELECTRICAL SPECIFICATIONS
TEST
DESCRIPTION
REQUIREMENT
DIELECTRIC
WITHSTANDING
VOLTAGE
No appearance of arcing
and break down.
Leak current: 1mA Max.
Impressed voltage is AC 1000V rms.
between adjacent two contacts for one
minute.
――――
1000MΩ Min.
Impressed voltage is DC 500V between
adjacent two contacts for one minute.
――――
- Initial /
25 mΩ Max.
- Change of contact
resistance after
environmental tests /
20 mΩ Max.
Contact resistance is measured
at Short Circuit.
Current: 1.5mA
Open Circuit Voltage: 20mV
by 4 terminal method.
* Measurement values include
the resistance of contact pins
as conductive material.
INSULATION
RESIDENSE
CONTACT
RESISTANCE
RELATED
STANDARD
TEST CONDITION
See Table 1.
* Refer to Table 1 regarding the conditions
of each environmental test.
Table 1: ENVIROMENTAL TEST
ITEM
MOISTURE
RELATED STANDARD
-10 ∼ 65°C, Relative Humidity 95% / 10 cycles
MIL-STD-202F106D
NaCl 5% solution, 35°C / 48 hours
MIL-STD-202F101D
THERMAL SHOCK
-55°C→25°C→85°C→25°C / 5 cycles
MIL-STD-202F107G
HUMIDITY
(STEADY STATE)
40°C, Relative Humidity 95% / 96 hours
MIL-STD-202F103B
SALT SPRAY
THERMAL LIFE
H2S GAS
7.
TEST CONDITION
Steady Current: Current Rating × 110%, 85°C / 1000 hours
3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours
――――
JEIDA-38-1984
PLATING SPEC INDICATION ON CONNECTOR
The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following
plating specs.
N XX or n XX : PR plating
C XX or c XX : SC plating
S XX or s XX : S plating
* XX : two alphabet letters
8.
PACKAGE & IDENTIFICATION
These products are packed with plastic tray and carton box for transit.
Carton box are identified by part number, quantity, maker name and lot number.
9
JNPS-0846
9.
STORAGE
This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity
40 ∼ 70%.
10. ATTENTIONS
10-1
BOARD MOUNTING
In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board
by soldering, more than 0.4mm thickness spacers (ex. plastic washer with high temperature resistance)
should be used for spacing between the connector body and PC board.
10-2
COMPATIBILITY WITH IC SOCKET
IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S.
IC socket can not be used for (X)3XXX-0000 PR.
10