F E AT U R E S MODEL NO. DA029 5 30 - 500 MHz 50 mA, +5 VDC +40 dBm 3rd Order Intercept 0.5 dB LSB, 63.5 dB Range TTL Control See100C1595 for Connectorized Version See DA0795 for Surface Mount Version 7 BIT PIN Diode 7 Section Attenuator RF GND GND RF IN/OUT IN/OUT 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 PART IDENTIFICATION • • • • • • • • • • • • • • • • 2.00 MAX .20 32 dB 0.5 dB 1 dB 2 dB 4 dB 8 dB 16 dB • • • • • • • • • • • • • • • • • • • • • .20 .018 ±.002 DIA 38 PLACES 1.800 • • •• 1 2 3 +5V GND GND 1 19 .800 4 5 6 7 I.L. (dB) 9 10 11 12 13 14 15 16 17 18 19 Min Typ Max Units Operating Frequency DC Current Control Type T YP I CA L P E R F OR MA NC E 30 50 TTL High Low Insertion Loss Attenuation 8 6 1.2 4 1.1 0 40 -400 6.0 63.5 Accuracy I. LOSS VSWR Impedance Switching Speed Transition (Rise/Fall) Time Switching (Video) Transients Intercept Points 2nd 2 VSWR 1.0 4.2 0.5 LSB Range 1.3 500 85 MHz mA at 25 °C Control Current 1.4 C5 GND GND C6 C7 GND GND "0" "0" "0" D.C. 4dB 8dB 16dB GUARANTEED PERFORMANCE Parameter VSWR 8 C1 GND GND C2 C3 GND GND GND C4 "0" "0" "0" "1" 0.5dB 1dB 2dB 32dB 20 .xx = .02 .xxx = .010 10 0 10 • 1.00 MAX 38 1.5 • .100 TYP CONTRASTING COLOR BEAD 40 100 FREQUENCY (MHz) 400 1000 1.2/1 50 5.5 1 100 +66 +40 +18 3rd RF Power Operate No Damage Operating Temperature DA I C O In d u s t r i e s -55 +25 µA µA dB dB dB dB Conditions At +5 VDC Supply 7 Line Logic “0” = Thru Logic “1” = Attenuation VIH = +2.7 V VIL = +0.5 V 0.5, 1, 2, 4, 8, 16, 32 0.5 dB Section: ± 0.125 dB 1 - 63.5 dB Sections: ± (0.15 dB +2% of Atten. Setting in dB) 1.35/1 20 +13 +20 +125 OHMS µSec µSec mV dBm dBm dBm dBm °C 50% TTL to 90% / 10% RF 90% / 10% or 10% / 90% RF 0.1 dB Compression TA Rev. C / Iss. 1