Crystal oscillator HIGH-STABILITY HIGH-FREQUENCY OSCILLATOR HG-1012JA/2012JA Product number (please refer to page 2) Q35 1 1 JA0 x x x x x 0 0 Q35 1 2 JA0 x x x x x 0 0 • Cylindrical AT crystal unit built-in, thus assuring high reliability. • Excellent heat resistance. • Low current consumption. Actual size Specifications (characteristics) Specifications Item Symbol Output frequency range Max. supply voltage Power source voltage Operating voltage Storage temperature Temperature range Operable temperature HG-1012JA f0 1.5000 MHz to 28.63636 MHz VDD-GND -0.5 V to +7.0 V Frequency stability VDD 5.0 V ±0.25 V TSTG -55 °C to +125 °C TOPR -40 °C to +85 °C ∆f/f0 Current consumption Duty High output voltage Low output voltage Output load condition Output rise time Output fall time Oscillation start up time Aging AV: ±20 x 10-6, BV: ±25 × 10-6 BX: ±25 x 10-6, CX: ±30 × 10-6 SV: ±15 x 10-6, AV: ±20 x 10-6 BX: ±25 x 10-6 Ta= -20 °C to +70 °C Ta= -40 °C to +85 °C tW/t 40 % to 60 % 1/2 VDD level VOH VDD -0.4 V Min. IOH= -0.8 mA VOL CL 0.4 V Max. IOL=3.2 mA 15 pF Max. tTLH 8 ns Max. 20 %→80 % VDD level tTHL 8 ns Max. 80 %→20 % VDD level fa No load condition Time at 4.75 V to be 0 s 4 ms Max. ±5 x 10-6/year Max. ±2 x 10-6/year Max. Ta=+25 °C, first year ±2 x 10-6 Max. Three drops on a hard wooden board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions ±10 x 10-6 Max. External dimensions (Unit: mm) Recommended soldering pattern 1 2 3 4 Ts GND OUT VDD 1.3 3.0 8.65 9.8 Max. 4.06 4.7 Max. HG2012 AV 1.5000M E 9357A #2 0.51 5.08 Ts terminal should be kept open. 0.25 Min. 0.25 8.8 14.0 Max. 61 (Unit: mm) NO. Pin terminal #3 #1 Stored as bare product after unpacking 10 mA Max. S.R. #4 VDD =4.75 V to 5.25 V lop tOSC Shock resistance Remarks HG-2012JA 7.62 5.08