ETC MKP375

BCcomponents
DATA SHEET
KP/MKP 375
AC and Pulse
metallized polypropylene film
capacitors
Product specification
Supersedes data of April 1999
File under BCcomponents, BC05
2000 Feb 01
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP RADIAL LACQUERED TYPE
PITCH 10/15/22.5/27.5 mm
PITCH 7.5 mm (bent back leads)
296x12(full_width)
P(bent back leads) = 7.5 mm
P = 10 mm
P = 15 - 22.5 -27.5 mm
CBA951
Fig.1 Simplified outline.
FEATURES
• 10 to 27.5 mm lead pitch
QUICK REFERENCE DATA
DESCRIPTION
VALUE
• Supplied loose and taped
Capacitance range (E24 series) 100 pF to 270 nF
• Taped products available on
request.
Capacitance tolerance
±5%; ±3.5%
Rated (DC) voltage
630 V; 1000 V; 1600 V; 2000 V; 2500 V
APPLICATIONS
• Where high currents and steep
pulses occur
• For deflection circuits in television
receivers.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-17/104”.
2000 Feb 01
Rated (AC) voltage
300 V; 400 V; 500 V; 600 V; 880 V
Rated peak-to-peak voltage
850 V; 1100 V; 1400 V; 1700 V; 2500 V
Climatic category
55/105/56
Maximum application
temperature
105 °C
Rated temperature
85 °C
Reference specification
IEC 60384-17
Performance grade:
for C > 5.6 nF and 2500 V
grade 1 (long life)
for C ≤ 5.6 nF
grade 2 (general purpose)
Stability grade
grade 2
2
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
COMPOSITION OF CATALOGUE NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
15.0/7.5 mm
10.0 mm
375
15.0 mm
CAPACITANCE
22.5 mm
(numerically)
27.5 mm
0.01
1
0.1
2
1
3
10
4
Example:
104 = 10 x 10 = 100 nF
2222
TYPE
PACKAGING
375 XX XX X
LEAD CONFIGURATION
C-TOL
630 V
1000 V
1600 V
1600 V
monitor
type
lead length 5.0 mm
loose in box
lead length 3.5 mm
375
taped on reel
H = 16.0 mm; P0 = 12.7 mm
taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm
2000 Feb 01
3
±5%
14
24
34
64
±3.5%
15
25
35
65
±5%
10
20
30
60
±3.5%
11
21
31
61
±5%
12
22
32
62
±3.5%
13
23
33
63
±5%
16
26
36
66
±3.5%
17
27
37
67
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
TYPE AND PITCHES
MULTIPLIER
(nF)
15.0/7.5 mm
10.0 mm
375
15.0 mm
CAPACITANCE
22.5 mm
(numerically)
27.5 mm
0.01
1
0.1
2
1
3
10
4
Example:
104 = 10 x 10 = 100 nF
2222
TYPE
PACKAGING
375 XX XX X
LEAD CONFIGURATION
C-TOL
2000 V
2000 V
2500 V
monitor
type
lead length 5.0 mm
loose in box
lead length 3.5 mm
375
taped on reel
H = 16.0 mm; P0 = 12.7 mm
taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm
2000 Feb 01
4
2500 V
monitor
type
±5%
44
74
91
84
±3.5%
45
75
91
85
±5%
40
70
91
80
±3.5%
41
71
91
81
±5%
42
72
−
82
±3.5%
43
73
−
83
±5%
46
−
−
−
±3.5%
47
−
−
−
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 10 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.0 for dt = 0.6 mm.
(2) 0 ≤ α < 50°
Fig.4 Outline.
Specific reference data for the 630 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 630 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
10−4
≤10 × 10−4
≤6 ×
15000 V/µs
>100000 MΩ
>100000 MΩ
>400 V
1008 V; 1 minute
2840 V; 1 minute
Available 630 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
ORDERING
2222 375 14...
2222 375 15...
2222 375 10...
2222 375 11...
2222 375 12...
2222 375 13...
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
5
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 630 V; URac = 300 V/Up-p = 850 V
CATALOGUE NUMBER(1)
C
(pF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm
0.65
2222 375 14681
0.65
2222 375 14751
820
0.70
2222 375 14821
910
0.70
2222 375 14911
1000
0.70
2222 375 14102
0.75
2222 375 14112
680
750
1100
5.0 × 13.0 × 14.5
5.5 × 13.5 × 14.5
0.75
2222 375 14122
1300
0.75
2222 375 14132
1500
0.80
2222 375 14152
1600
0.85
2222 375 14162
1800
0.80
2222 375 14182
2000
0.85
2222 375 14202
0.90
2222 375 14222
1200
2200
6.0 × 14.0 × 14.5
2400
2700
6.5 × 14.5 × 14.5
1.0
2222 375 14242
1.1
2222 375 14272
Note
1. The shading indicates preferred types.
2000 Feb 01
6
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 15 mm
PITCH 7.5 mm (bent back leads)
l
296x12(full_width)
l
b
seating plane (1)
h
b
h'
α
F'
(2)
(3)
F
lt
H
Ødt
10
A
P
CBA818
Ødt
15
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°.
(3) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.5 Outline.
Specific reference data for the 630 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 630 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤6 × 10−4
at 100 kHz
≤10 × 10−4
8000 V/µs
>100000 MΩ
>100000 MΩ
>400 V
1008 V; 1 minute
2840 V; 1 minute
Available 630 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
Taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 14...
2222 375 15...
2222 375 10...
2222 375 11...
2222 375 12...
2222 375 13...
2222 375 16...
2222 375 17...
ORDERING
preferred
on request
on request
on request
on request
on request
preferred
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
7
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 630 V; URac = 300 V/Up-p = 850 V
CATALOGUE NUMBER
C
(pF)
DIMENSIONS(1)
bmax × h (h’)max × lmax
(mm)
MASS
(g)
LOOSE IN BOX
REEL DIAMETER = 500 mm;
H = 16.0 mm; P0 = 15.0 mm(2)
lt = 5.0 ±1.0 mm
pitch 7.5 mm (bent back)
C-tol = ±5%
C-tol = ±5%
catalogue
number(3)
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
10000
11000
12000
13000
15000
16000
18000
20000
22000
24000
27000
30000
33000
36000
39000
2.0
2222 375 14302
2222 375 14332
2222 375 14362
2222 375 14392
2222 375 14432
2222 375 14472
2222 375 14512
2222 375 14562
2222 375 14622
2222 375 14682
2222 375 14752
2222 375 14822
2222 375 14912
2222 375 14103
2222 375 14113
2222 375 14123
2222 375 14133
2222 375 14153
2222 375 14163
2222 375 14183
2222 375 14203
2222 375 14223
2222 375 14243
2222 375 14273
2222 375 14303
2222 375 14333
.. 16302
.. 16332
.. 16362
.. 16392
.. 16432
.. 16472
.. 16512
.. 16562
.. 16622
.. 16682
.. 16752
.. 16822
.. 16912
.. 16103
.. 16113
.. 16123
.. 16133
.. 16153
.. 16163
.. 16183
.. 16203
.. 16223
.. 16243
.. 16273
.. 16303
.. 16333
2.3
on request
on request
5.0 × 14.0 (15.5) × 18.5
1.0
5.5 × 14.5 (16.0) × 18.5
1.1
6.0 × 15.0 (16.5) × 18.5
1.2
6.5 × 15.5 (17.0) × 18.5
1.3
7.0 × 16.0 (17.5) × 18.5
7.5 × 16.5 (18.0) × 18.5
1.5
1.6
8.0 × 17.0 (18.5) × 18.5
1.9
8.5 × 17.5 (19.0) × 18.5
9.5 × 18.5 (20.0) × 18.5
Notes
1. Dimensions in brackets for bent back leads.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm.
b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm.
Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.
3. The shading indicates preferred types.
2000 Feb 01
8
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.6 Outline.
Specific reference data for the 630 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤8 × 10−4
≤8 × 10−4
≤15 × 10−4
≤20 × 10−4
2800 V/µs
1900 V/µs
>100000 MΩ
>100000 MΩ
>400 V
1008 V; 1 minute
2840 V; 1 minute
Available 630 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 14...
2222 375 15...
2222 375 10...
2222 375 11...
2222 375 12...
2222 375 13...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
9
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 630 V; URac = 300 V/Up-p = 850 V
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.036
2222 375 14363
0.039
2222 375 14393
0.043
2222 375 14433
0.047
7.0 × 20.0 × 26.0
2.7
2222 375 14473
0.051
2222 375 14513
0.056
2222 375 14563
0.062
0.068
0.075
0.082
2222 375 14623
7.5 × 20.5 × 26.0
3.0
8.0 × 21.0 × 26.0
3.3
2222 375 14683
2222 375 14753
2222 375 14823
0.091
8.5 × 21.5 × 26.0
3.8
2222 375 14913
0.1
9.0 × 22.0 × 26.0
4.0
2222 375 14104
0.11
9.5 × 22.5 × 26.0
4.3
2222 375 14114
0.12
10.0 × 23.0 × 26.0
4.7
2222 375 14124
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.13
9.5 × 22.5 × 30.0
4.7
2222 375 14134
0.15
10.0 × 23.0 × 30.0
5.2
2222 375 14154
0.16
10.5 × 23.5 × 30.0
5.5
2222 375 14164
0.18
11.0 × 24.0 × 30.0
6.0
2222 375 14184
0.2
11.5 × 24.5 × 30.0
6.6
2222 375 14204
0.22
12.5 × 25.5 × 30.0
7.1
2222 375 14224
0.24
13.0 × 26.0 × 30.0
7.7
2222 375 14244
0.27
13.5 × 26.5 × 30.0
8.5
2222 375 14274
Note
1. The shading indicates preferred types.
2000 Feb 01
10
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 10 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.0 for dt = 0.6 mm.
(2) 0 ≤ α < 50°
Fig.7 Outline.
Specific reference data for the 1000 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 1000 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
10−4
≤10 × 10−4
≤6 ×
27000 V/µs
>100000 MΩ
>100000 MΩ
>500 V
1600 V; 1 minute
2840 V; 1 minute
Available 1000 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
ORDERING
2222 375 24...
2222 375 25...
2222 375 20...
2222 375 21...
2222 375 22...
2222 375 23...
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
11
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
CATALOGUE NUMBER(1)
C
(pF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm
2222 375 24101
100
110
120
5.0 × 13.0 × 14.5
2222 375 24111
0.50
2222 375 24121
130
2222 375 24131
150
0.55
2222 375 24151
160
0.55
2222 375 24161
180
0.55
2222 375 24181
200
0.55
2222 375 24201
220
0.60
2222 375 24221
240
0.60
2222 375 24241
270
0.60
2222 375 24271
300
0.60
2222 375 24301
330
0.60
2222 375 24331
360
0.60
2222 375 24361
0.65
2222 375 24391
430
0.70
2222 375 24431
470
0.75
2222 375 24471
510
0.75
2222 375 24511
560
0.80
2222 375 24561
620
0.80
2222 375 24621
680
0.80
2222 375 24681
750
0.70
2222 375 24751
820
0.70
2222 375 24821
390
5.5 × 13.5 × 14.5
910
0.70
2222 375 24911
1000
0.75
2222 375 24102
1100
0.85
2222 375 24112
6.0 × 14.0 × 14.5
0.90
2222 375 24122
1300
0.85
2222 375 24132
1500
0.90
2222 375 24152
1200
Note
1. The shading indicates preferred types.
2000 Feb 01
12
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 15 mm
PITCH 7.5 mm (bent back leads)
l
296x12(full_width)
l
b
seating plane (1)
h
b
h'
α
F'
(2)
(3)
F
lt
H
Ødt
10
A
P
CBA818
Ødt
15
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°.
(3) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.8 Outline.
Specific reference data for the 1000 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 1000 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤6 × 10−4
at 100 kHz
≤10 × 10−4
15000 V/µs
>100000 MΩ
>100000 MΩ
>500 V
1600 V; 1 minute
2840 V; 1 minute
Available 1000 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
Taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 24...
2222 375 25...
2222 375 20...
2222 375 21...
2222 375 22...
2222 375 23...
2222 375 26...
2222 375 27...
ORDERING
preferred
on request
on request
on request
on request
on request
preferred
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
13
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
CATALOGUE NUMBER
C
(pF)
DIMENSIONS(1)
bmax × h (h’)max × lmax
(mm)
LOOSE IN BOX
REEL DIAMETER = 500 mm;
H = 16.0 mm; P0 = 15.0 mm(2)
lt = 5.0 ±1.0 mm
pitch 7.5 mm (bent back)
C-tol = ±5%
C-tol = ±5%
catalogue number(3)
last 5 digits(3)
MASS
(g)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm
1600
2222 375 24162
.. 26162
2222 375 24182
.. 26182
2222 375 24202
.. 26202
2200
2222 375 24222
.. 26222
2400
2222 375 24242
.. 26242
2700
2222 375 24272
.. 26272
3000
2222 375 24302
.. 26302
3300
2222 375 24332
.. 26332
3600
2222 375 24362
.. 26362
3900
2222 375 24392
.. 26392
2222 375 24432
.. 26432
4700
2222 375 24472
.. 26472
5100
2222 375 24512
.. 26512
5600
2222 375 24562
.. 26562
6200
2222 375 24622
.. 26622
6800
2222 375 24682
.. 26682
7500
2222 375 24752
.. 26752
2222 375 24822
.. 26822
2222 375 24912
.. 26912
2222 375 24103
.. 26103
2222 375 24113
.. 26113
1800
2000
4300
8200
5.5 × 14.5 (16.0) × 18.5
6.0 × 15.0 (16.5) × 18.5
7.0 × 16.0 (17.5) × 18.5
1.1
1.2
1.4
9100
7.5 × 16.5 (18.0) × 18.5
1.6
8.0 × 17.0 (18.5) × 18.5
1.8
2222 375 24123
.. 26123
13000
8.5 × 17.5 (19.0) × 18.5
1.9
2222 375 24133
.. 26133
15000
9.0 × 18.0 (19.5) × 18.5
2.1
2222 375 24153
.. 26153
10000
11000
12000
Notes
1. Dimensions in brackets for bent back leads.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm.
b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm.
Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.
3. The shading indicates preferred types.
2000 Feb 01
14
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
CBA070
Fig.9 Outline.
Specific reference data for the 1000 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
for C ≤ 47 nF
for C > 47 nF
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
5000 V/µs
3300 V/µs
>100000 MΩ
>100000 MΩ
>500 V
1600 V; 1 minute
[ 1, 6 – ( 0, 0364 ⋅ C – 47 ) ] × 1000V ; 1 minute
2840 V; 1 minute
Available 1000 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 24...
2222 375 25...
2222 375 20...
2222 375 21...
2222 375 22...
2222 375 23...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
15
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.016
0.018
0.02
0.022
0.024
0.027
0.03
0.033
0.036
0.039
0.043
6.0 × 19.0 × 26.0
2.2
6.5 × 19.5 × 26.0
2.5
7.0 × 20.0 × 26.0
2.7
7.5 × 20.5 × 26.0
3.1
8.0 × 21.0 × 26.0
3.4
8.5 × 21.5 × 26.0
3.7
9.0 × 22.0 × 26.0
4.1
2222 375 24163
2222 375 24183
2222 375 24203
2222 375 24223
2222 375 24243
2222 375 24273
2222 375 24303
2222 375 24333
2222 375 24363
2222 375 24393
2222 375 24433
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.047
0.051
0.056
0.062
7.0 × 20.0 × 30.0
3.1
7.5 × 20.5 × 30.0
3.4
8.0 × 21.0 × 30.0
3.8
2222 375 24623
2222 375 24473
2222 375 24513
2222 375 24563
0.068
8.5 × 21.5 × 30.0
4.0
2222 375 24683
0.075
9.0 × 22.0 × 30.0
4.4
2222 375 24753
0.082
9.5 × 22.5 × 30.0
4.7
2222 375 24823
0.091
10.0 × 23.0 × 30.0
5.1
2222 375 24913
0.1
10.5 × 23.5 × 30.0
5.5
2222 375 24104
0.11
11.0 × 24.0 × 30.0
5.9
2222 375 24114
0.12
11.5 × 24.5 × 30.0
6.3
2222 375 24124
0.13
12.0 × 25.0 × 30.0
6.8
2222 375 24134
0.15
12.5 × 25.5 × 30.0
7.6
2222 375 24154
Note
1. The shading indicates preferred types.
2000 Feb 01
16
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 15 mm
PITCH 7.5 mm (bent back leads)
l
296x12(full_width)
l
b
seating plane (1)
h
b
h'
α
F'
(2)
(3)
F
lt
H
Ødt
10
A
P
CBA818
Ødt
15
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°.
(3) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.10 Outline.
Specific reference data for the 1600 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 1600 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤6 × 10−4
at 100 kHz
≤10 × 10−4
21000 V/µs
>100000 MΩ
>100000 MΩ
>550 V
2560 V; 1 minute
2840 V; 1 minute
Available 1600 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
Taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 34...
2222 375 35...
2222 375 30...
2222 375 31...
2222 375 32...
2222 375 33...
2222 375 36...
2222 375 37...
ORDERING
preferred
on request
on request
on request
on request
on request
preferred
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
17
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1600 V; URac = 500 V/Up-p = 1400 V
CATALOGUE NUMBER
C
(pF)
DIMENSIONS(1)
bmax × h (h’)max × lmax
(mm)
LOOSE IN BOX
REEL DIAMETER = 500 mm;
H = 16.0 mm; P0 = 15.0 mm(2)
lt = 5.0 ±1.0 mm
pitch 7.5 mm (bent back)
C-tol = ±5%
C-tol = ±5%
catalogue number(3)
last 5 digits(3)
MASS
(g)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm
680
750
5.5 × 14.5 (15.0) × 18.5
0.75
820
2222 375 34681
.. 36681
2222 375 34751
.. 36751
2222 375 34821
.. 36821
910
0.80
2222 375 34911
.. 36911
1000
0.85
2222 375 34102
.. 36102
1100
6.0 × 15.0 (15.5) × 18.5
0.85
2222 375 34112
.. 36112
1200
0.90
2222 375 34122
.. 36122
1300
0.95
2222 375 34132
.. 36132
2222 375 34152
.. 36152
2222 375 34162
.. 36162
2222 375 34182
.. 36182
1500
5.5 × 14.5 (16.0) × 18.5
1.1
6.0 × 15.0 (16.5) × 18.5
1.2
6.5 × 15.5 (17.0) × 18.5
1.3
7.0 × 16.0 (17.5) × 18.5
1.4
7.5 × 16.5 (18.0) × 18.5
1.6
3300
8.0 × 17.0 (18.5) × 18.5
1.7
3600
8.5 × 17.5 (19.0) × 18.5
1.8
1600
1800
2000
2200
2400
2700
3000
3900
4300
9.0 × 18.0 (19.5) × 18.5
2.0
2222 375 34202
.. 36202
2222 375 34222
.. 36222
2222 375 34242
.. 36242
2222 375 34272
.. 36272
2222 375 34302
.. 36302
2222 375 34332
.. 36332
2222 375 34362
.. 36362
2222 375 34392
.. 36392
2222 375 34432
.. 36432
Notes
1. Dimensions in brackets for bent back leads.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm.
b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm.
Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.
3. The shading indicates preferred types.
2000 Feb 01
18
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.11 Outline.
Specific reference data for the 1600 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
7000 V/µs
4700 V/µs
>100000 MΩ
>100000 MΩ
>550 V
2560 V; 1 minute
2840 V; 1 minute
Available 1600 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 34...
2222 375 35...
2222 375 30...
2222 375 31...
2222 375 32...
2222 375 33...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
19
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1600 V; URac = 500 V/Up-p = 1400 V
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
2222 375 34472
0.0047
0.0051
6.0 × 19.0 × 26.0
2222 375 34512
2.0
2222 375 34562
0.0056
0.0062
2222 375 34622
6.5 × 19.5 × 26.0
2.1
7.0 × 20.0 × 26.0
2.3
0.0091
7.5 × 20.5 × 26.0
2.5
2222 375 34912
0.01
8.0 × 21.0 × 26.0
2.6
2222 375 34103
8.5 × 21.5 × 26.0
2.9
0.013
9.0 × 22.0 × 26.0
3.1
2222 375 34133
0.015
9.5 × 22.5 × 26.0
3.5
2222 375 34153
0.0068
0.0075
0.0082
0.011
0.012
2222 375 34682
2222 375 34752
2222 375 34822
2222 375 34113
2222 375 34123
0.016
10.0 × 23.0 × 26.0
3.6
2222 375 34163
0.018
10.5 × 23.5 × 26.0
4.0
2222 375 34183
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.02
9.0 × 22.0 × 30.0
4.2
2222 375 34203
0.022
9.5 × 22.5 × 30.0
4.4
2222 375 34223
0.024
10.0 × 23.0 × 30.0
4.7
2222 375 34243
0.027
10.5 × 23.5 × 30.0
5.2
2222 375 34273
0.03
11.0 × 24.0 × 30.0
5.6
2222 375 34303
0.033
11.5 × 24.5 × 30.0
6.0
2222 375 34333
0.036
12.0 × 25.0 × 30.0
6.5
2222 375 34363
0.039
12.5 × 25.5 × 30.0
6.9
2222 375 34393
Note
1. The shading indicates preferred types.
2000 Feb 01
20
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 15 mm
PITCH 7.5 mm (bent back leads)
l
296x12(full_width)
l
b
seating plane (1)
h
b
h'
α
F'
(2)
(3)
F
lt
H
Ødt
10
A
P
CBA818
Ødt
15
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°.
(3) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.12 Outline.
Specific reference data for the 1600 V DC capacitors (monitor type)
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 1600 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤6 × 10−4
at 100 kHz
≤10 × 10−4
21000 V/µs
>100000 MΩ
>100000 MΩ
>550 V
2560 V; 1 minute
2840 V; 1 minute
Available 1600 V DC versions (monitor type)
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
Taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 64...
2222 375 65...
2222 375 60...
2222 375 61...
2222 375 62...
2222 375 63...
2222 375 66...
2222 375 67...
ORDERING
preferred
on request
on request
on request
on request
on request
preferred
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
21
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type)
CATALOGUE NUMBER
C
(pF)
DIMENSIONS(1)
bmax × h (h’)max × lmax
(mm)
LOOSE IN BOX
REEL DIAMETER = 500 mm;
H = 16.0 mm; P0 = 15.0 mm(2)
lt = 5.0 ±1.0 mm
pitch 7.5 mm (bent back)
C-tol = ±5%
C-tol = ±5%
catalogue number(3)
last 5 digits(3)
MASS
(g)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm
7.5 × 16.5 (18.0) × 18.5
1.6
8.0 × 17.0 (18.5) × 18.5
1.7
1300
8.5 × 17.5 (19.0) × 18.5
1500
1600
1000
1100
1200
2222 375 64102
.. 66102
2222 375 64112
.. 66112
2222 375 64122
.. 66122
1.8
2222 375 64132
.. 66132
9.0 × 18.0 (19.5) × 18.5
2.0
2222 375 64152
.. 66152
9.5 × 18.5 (20.0) × 18.5
2.3
2222 375 64162
.. 66162
Notes
1. Dimensions in brackets for bent back leads.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm.
b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm.
Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.
3. The shading indicates preferred types.
2000 Feb 01
22
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.13 Outline.
Specific reference data for the 1600 V DC capacitors (monitor type)
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
7000 V/µs
4700 V/µs
>100000 MΩ
>100000 MΩ
>550 V
2560 V; 1 minute
2840 V; 1 minute
Available 1600 V DC versions (monitor type)
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 64...
2222 375 65...
2222 375 60...
2222 375 61...
2222 375 62...
2222 375 63...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
23
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type)
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.0018
0.002
0.0022
0.0024
0.0027
0.003
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
0.0082
6.0 × 19.0 × 26.0
2.0
6.5 × 19.5 × 26.0
2.1
7.0 × 20.0 × 26.0
2.3
7.5 × 20.5 × 26.0
2.5
8.0 × 21.0 × 26.0
2.6
8.5 × 21.5 × 26.0
2.9
9.0 × 22.0 × 26.0
9.5 × 22.5 × 26.0
10.0 × 23.0 × 26.0
10.5 × 23.5 × 26.0
3.1
3.5
3.6
4.0
2222 375 64182
2222 375 64202
2222 375 64222
2222 375 64242
2222 375 64272
2222 375 64302
2222 375 64332
2222 375 64362
2222 375 64392
2222 375 64432
2222 375 64472
2222 375 64512
2222 375 64562
2222 375 64622
2222 375 64682
2222 375 64752
2222 375 64822
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.0091
0.01
0.011
0.012
0.013
0.015
0.016
0.018
0.02
0.022
0.024
0.027
0.03
0.033
0.036
0.039
10.0 × 23.0 × 30.0
10.5 × 23.5 × 30.0
11.0 × 24.0 × 30.0
11.5 × 24.5 × 30.0
12.0 × 25.0 × 30.0
13.0 × 26.0 × 30.0
13.5 × 26.5 × 30.0
14.5 × 27.5 × 30.0
4.7
5.2
5.6
6.0
6.5
6.9
7.3
7.8
15.0 × 29.0 × 30.0
8.2
2222 375 64912
2222 375 64103
2222 375 64113
2222 375 64123
2222 375 64133
2222 375 64153
2222 375 64163
2222 375 64183
2222 375 64203
2222 375 64223
2222 375 64243
2222 375 64273
2222 375 64303
2222 375 64333
2222 375 64363
2222 375 64393
Note
1. The shading indicates preferred types.
2000 Feb 01
24
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 15 mm
PITCH 7.5 mm (bent back leads)
l
296x12(full_width)
l
b
seating plane (1)
h
b
h'
α
F'
(2)
(3)
F
lt
H
Ødt
10
A
P
CBA818
Ødt
15
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°.
(3) F − F’ < 0.3 mm
F = 7.5 +0.6/−0.1 mm
Fig.14 Outline.
Specific reference data for the 2000 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 2000 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
≤6 × 10−4
at 100 kHz
≤10 × 10−4
30000 V/µs
>100000 MΩ
>100000 MΩ
>600 V
3200 V; 1 minute
2840 V; 1 minute
Available 2000 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
Taped on reel
(bent back)
H = 16.0 mm; P0 = 15.0 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 44...
2222 375 45...
2222 375 40...
2222 375 41...
2222 375 42...
2222 375 43...
2222 375 46...
2222 375 47...
ORDERING
preferred
on request
on request
on request
on request
on request
preferred
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
25
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 2000 V; URac = 600 V/Up-p = 1700 V
C
(pF)
DIMENSIONS(1)
bmax × h (h’)max × lmax
(mm)
CATALOGUE NUMBER
LOOSE IN BOX
REEL DIAMETER = 500 mm;
H = 16.0 mm; P0 = 15.0 mm(2)
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
pitch 7.5 mm (bent back)
C-tol = ±5%
catalogue number(3)
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
100
0.75
2222 375 44101
.. 46101
110
0.75
2222 375 44111
.. 46111
120
0.75
2222 375 44121
.. 46121
130
0.75
2222 375 44131
.. 46131
150
0.75
2222 375 44151
.. 46151
160
0.75
2222 375 44161
.. 46161
180
0.75
2222 375 44181
.. 46181
200
0.75
2222 375 44201
.. 46201
220
0.75
2222 375 44221
.. 46221
5.5 × 14.5 (15.0) × 18.5
240
0.75
2222 375 44241
.. 46241
270
0.75
2222 375 44271
.. 46271
300
0.75
2222 375 44301
.. 46301
330
0.75
2222 375 44331
.. 46331
360
0.75
2222 375 44361
.. 46361
390
0.75
2222 375 44391
.. 46391
430
0.75
2222 375 44431
.. 46431
470
0.80
2222 375 44471
.. 46471
510
0.80
2222 375 44511
.. 46511
560
0.80
2222 375 44561
.. 46561
620
0.85
2222 375 44621
.. 46621
680
0.85
2222 375 44681
.. 46681
6.0 × 15.0 (15.5) × 18.5
750
0.90
2222 375 44751
.. 46751
820
6.5 × 15.5 (16.0) × 18.5
0.95
2222 375 44821
.. 46821
910
5.5 × 14.5 (16.0) × 18.5
1.1
2222 375 44911
.. 46911
2222 375 44102
.. 46102
1000
1100
2222 375 44112
.. 46112
6.0 × 15.0 (16.5) × 18.5
1.2
2222 375 44122
.. 46122
1200
1300
6.5 × 15.5 (17.0) × 18.5
1.3
2222 375 44132
.. 46132
2222 375 44152
.. 46152
1500
7.0 × 16.0 (17.5) × 18.5
1.4
1600
2222 375 44162
.. 46162
7.5 × 16.5 (18.0) × 18.5
1.5
2222 375 44182
.. 46182
1800
2000
8.0 × 17.0 (18.5) × 18.5
1.6
2222 375 44202
.. 46202
2222 375 44222
.. 46222
2200
8.5 × 17.5 (19.0) × 18.5
1.7
2400
9.0 × 18.0 (19.5) × 18.5
1.8
2222 375 44242
.. 46242
2222 375 44272
.. 46272
2700
9.5 × 18.5 (20.0) × 18.5
2.0
Notes
1. Dimensions in brackets for bent back leads.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm.
b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm.
Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request.
3. The shading indicates preferred types.
2000 Feb 01
26
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.15 Outline.
Specific reference data for the 2000 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
10000 V/µs
6700 V/µs
>100000 MΩ
>100000 MΩ
>600 V
3200 V; 1 minute
2840 V; 1 minute
Available 2000 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 44...
2222 375 45...
2222 375 40...
2222 375 41...
2222 375 42...
2222 375 43...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
27
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 2000 V; URac = 600 V/Up-p = 1700 V
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.003
0.0033
0.0036
2222 375 44302
6.0 × 19.0 × 26.0
2222 375 44332
2.1
2222 375 44362
2222 375 44392
0.0039
0.0043
2222 375 44432
6.5 × 19.5 × 26.0
2.3
7.0 × 20.0 × 26.0
2.6
7.5 × 20.5 × 26.0
2.8
8.0 × 21.0 × 26.0
3.0
0.0082
8.5 × 21.5 × 26.0
3.3
2222 375 44822
0.0091
9.0 × 22.0 × 26.0
3.6
2222 375 44912
0.01
9.5 × 22.5 × 26.0
3.8
2222 375 44103
0.0047
0.0051
0.0056
0.0062
0.0068
0.0075
2222 375 44472
2222 375 44512
2222 375 44562
2222 375 44622
2222 375 44682
2222 375 44752
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
9.0 × 22.0 × 30.0
3.8
2222 375 44113
0.012
9.5 × 22.5 × 30.0
4.1
2222 375 44123
0.013
10.0 × 23.0 × 30.0
4.4
2222 375 44133
0.015
10.5 × 23.5 × 30.0
4.9
2222 375 44153
0.011
0.016
11.0 × 24.0 × 30.0
5.1
2222 375 44163
0.018
11.5 × 24.5 × 30.0
5.6
2222 375 44183
0.02
12.5 × 25.5 × 30.0
6.1
2222 375 44203
0.022
13.0 × 26.0 × 30.0
6.5
2222 375 44223
Note
1. The shading indicates preferred types.
2000 Feb 01
28
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.16 Outline.
Specific reference data for the 2000 V DC capacitors (monitor type)
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P = 22.5 mm
P = 27.5 mm
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
10000 V/µs
6700 V/µs
>100000 MΩ
>100000 MΩ
>600 V
3200 V; 1 minute
2840 V; 1 minute
Available 2000 V DC versions (monitor type)
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 74...
2222 375 75...
2222 375 70...
2222 375 71...
2222 375 72...
2222 375 73...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
29
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 2000 V; URac = 600 V/Up-p = 1700 V (monitor type)
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.001
0.0011
0.0012
0.0013
0.0015
6.0 × 19.0 × 26.0
2.1
6.5 × 19.5 × 26.0
2.3
2222 375 74102
2222 375 74112
2222 375 74122
2222 375 74132
2222 375 74152
7.0 × 20.0 × 26.0
2.6
0.0018
7.5 × 20.5 × 26.0
2.8
2222 375 74182
0.002
8.0 × 21.0 × 26.0
3.0
2222 375 74202
0.0022
8.5 × 21.5 × 26.0
3.3
2222 375 74222
0.0024
9.0 × 22.0 × 26.0
3.6
2222 375 74242
0.0016
2222 375 74162
9.5 × 22.5 × 26.0
3.8
2222 375 74272
0.003
10.0 × 23.0 × 26.0
4.2
2222 375 74302
0.0033
10.5 × 23.5 × 26.0
4.5
2222 375 74332
11.0 × 24.0 × 26.0
4.9
0.0027
2222 375 74362
0.0036
0.0039
2222 375 74392
2222 375 74432
0.0043
0.0047
0.0051
11.5 × 24.5 × 26.0
2222 375 74472
5.3
2222 375 74512
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.0056
11.0 × 24.0 × 30.0
5.1
2222 375 74562
0.0062
11.5 × 24.5 × 30.0
5.6
2222 375 74622
0.0068
12.0 × 25.0 × 30.0
5.8
2222 375 74682
0.0075
12.5 × 25.5 × 30.0
6.1
2222 375 74752
0.0082
13.0 × 26.0 × 30.0
6.5
2222 375 74822
0.0091
14.0 × 27.0 × 30.0
7.0
2222 375 74912
0.01
14.5 × 27.5 × 30.0
7.5
2222 375 74103
2222 375 74113
0.011
0.012
0.013
15.5 × 29.5 × 30.0
2222 375 74123
8.1
2222 375 74133
2222 375 74153
0.015
Note
1. The shading indicates preferred types.
2000 Feb 01
30
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
144x12(halfpage)
PITCH 22.5 (bent back leads) /27.5 mm
l
b
144x12(halfpage)
seating
plane (1)
l
b
seating
plane (1)
h
h
(2) α
(2) α
lt
lt
P
P
Ødt
A
Ødt
A
CBA628
CBA632
(1) Hole ∅1.3 for dt = 0.8 mm.
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
(2) 0 ≤ α < 50°
Fig.17 Outline for pitch = 22.5 mm
(bent back leads).
Fig.18 Outline for pitch = 27.5 mm.
Specific reference data for the 2500 V DC capacitors
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 2500 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤10 × 10−4
18000 V/µs
>100000 MΩ
>100000 MΩ
>900 V
3500 V; 1 minute
2840 V; 1 minute
Available 2500 V DC versions
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 91...
2222 375 91...
2222 375 91...
2222 375 91...
2222 375 .....
2222 375 .....
ORDERING
on request
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
31
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 2500 V; URac = 880 V/Up-p = 2500 V
CATALOGUE NUMBER
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX; lt = 3.5 ±0.5 mm
MASS
(g)
P = 22.5 ±0.4 mm(1)
P = 27.5 ±0.4 mm
C-tol = ±5%
catalogue number
last 5 digits
0.001
2222 375 91001
.. 91003
0.0011
2222 375 91005
.. 91007
dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.0012
0.0013
7.0 × 20.0 × 30.0
2.9
0.0015
2222 375 91011
.. 91013
2222 375 91015
.. 91017
2222 375 91021
.. 91023
0.0016
2222 375 91025
.. 91027
0.0018
2222 375 91031
.. 91033
2222 375 91035
.. 91037
0.0020
7.5 × 20.5 × 30.0
2.9
8.0 × 21.0 × 30.0
3.2
0.0022
0.0024
0.0025
2222 375 91041
.. 91043
2222 375 91045
.. 91047
2222 375 91051
.. 91053
0.0027
8.5 × 21.5 × 30.0
3.5
2222 375 91055
.. 91057
0.0030
9.0 × 22.0 × 30.0
3.8
2222 375 91061
.. 91063
0.0033
9.5 × 22.5 × 30.0
4.0
2222 375 91065
.. 91067
0.0036
10.0 × 23.0 × 30.0
4.3
2222 375 91071
.. 91073
0.0039
10.5 × 23.5 × 30.0
4.6
2222 375 91075
.. 91077
0.0043
11.0 × 24.0 × 30.0
5.0
2222 375 91081
.. 91083
0.0047
11.5 × 24.5 × 30.0
5.3
2222 375 91085
.. 91087
0.0051
12.0 × 25.0 × 30.0
5.7
2222 375 91091
.. 91093
0.0056
12.5 × 25.5 × 30.0
6.1
2222 375 91095
.. 91097
0.0062
13.5 × 26.5 × 30.0
6.6
2222 375 91101
.. 91103
0.0068
14.0 × 27.5 × 30.0
7.2
2222 375 91105
.. 91107
Note
1. Only for bent back leads.
2000 Feb 01
32
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
KP/MKP 375 GENERAL DATA
PITCH 22.5/27.5 mm
b
l
296x12(full_width)
h
seating plane (1)
α
(2)
lt
Ødt
A
P
CBA070
(1) Hole ∅1.3 for dt = 0.8 mm.
(2) 0 ≤ α < 50°
Fig.19 Outline.
Specific reference data for the 2500 V DC capacitors (monitor type)
VALUE
DESCRIPTION
Tangent of loss angle:
P = 22.5 mm
P = 27.5 mm
Rated voltage pulse slope (dU/dt)R at 2500 V (DC)
R between leads at 500 V; 1 minute
R between interconnected leads and case; 500 V; 1 minute
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
at 10 kHz
at 100 kHz
≤6 × 10−4
≤6 × 10−4
≤10 × 10−4
≤15 × 10−4
18000 V/µs
>100000 MΩ
>100000 MΩ
>900 V
3500 V; 1 minute
2840 V; 1 minute
Available 2500 V DC versions (monitor type)
PACKAGING(1)
DIMENSIONS
C-tol
±5%
±3.5%
±5%
±3.5%
±5%
±3.5%
lt = 5.0 ±1.0 mm
Loose in box
lt = 3.5 ±0.5 mm
Taped on reel
H = 16.0 mm; P0 = 12.7 mm; note 2
FIRST 9 DIGITS OF
CATALOGUE NUMBER
2222 375 84...
2222 375 85...
2222 375 80...
2222 375 81...
2222 375 82...
2222 375 83...
ORDERING
preferred
on request
on request
on request
on request
on request
Notes
1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available.
2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging
information”.
2000 Feb 01
33
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
URdc = 2500 V; URac = 600 V/Up-p = 1700 V (monitor type)
CATALOGUE NUMBER(1)
C
(µF)
DIMENSIONS
bmax × hmax × lmax
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 ±1.0 mm
C-tol = ±5%
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.001
0.0011
0.0012
0.0013
0.0015
7.0 × 20.0 × 26.0
2.6
7.5 × 20.5 × 26.0
2.8
2222 375 84102
2222 375 84112
2222 375 84122
2222 375 84132
2222 375 84152
8.5 × 21.5 × 26.0
3.3
0.0018
9.0 × 22.0 × 26.0
3.6
2222 375 84182
0.002
9.5 × 22.5 × 26.0
3.8
2222 375 84202
0.0022
10.0 × 23.0 × 26.0
4.1
2222 375 84222
0.0024
10.5 × 23.5 × 26.0
4.5
2222 375 84242
0.0027
11.0 × 24.0 × 26.0
4.9
2222 375 84272
0.0016
2222 375 84162
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
0.003
11.0 × 24.0 × 30.0
5.1
2222 375 84302
0.0033
11.5 × 24.5 × 30.0
5.4
2222 375 84332
0.0036
12.0 × 25.0 × 30.0
5.8
2222 375 84362
0.0039
12.5 × 25.5 × 30.0
6.1
2222 375 84392
0.0043
13.0 × 26.0 × 30.0
6.5
2222 375 84432
0.0047
13.5 × 26.5 × 30.0
6.9
2222 375 84472
0.0051
14.0 × 27.0 × 30.0
7.3
2222 375 84512
0.0056
15.0 × 29.0 × 30.0
7.8
2222 375 84562
0.0062
2222 375 84622
0.0068
2222 375 84682
0.0075
15.5 × 29.5 × 30.0
8.2
2222 375 84752
0.0082
2222 375 84822
0.0091
2222 375 84912
Note
1. The shading indicates preferred types.
2000 Feb 01
34
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CONSTRUCTION
Mounting
Description
NORMAL USE
• Series-constructed, impregnated polypropylene film,
aluminium foil and metallized internal electrode
The capacitors are designed for printed-circuit boards
applications. The capacitors packed in bandoliers are
designed for mounting on printed-circuit boards by means
of automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packaging information”.
• Protected by a hard, water-repellent, solvent-resistant
epoxy lacquer
• Radial leads, solder-coated:
– Copper clad steel wire for original pitch = 10 mm
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
– Copper wire for original pitch = 15, 22.5 and
27.5 mm.
AND SHOCK
FOR KP/MKP 630 V - 2000 V AND 2500 V (MONITOR TYPE)
• For pitches of ≤15 mm capacitors shall be mechanically
fixed by the leads.
metal spray layer
• For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
144x12(halfpage)
aluminium foil
Storage temperature
• Storage temperature: Tstg = −25 to +40 °C with RH
maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperature of 23 ±1 °C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
polypropylene film
metallized polypropylene film
For reference testing, a conditioning period shall be
applied over 96 ±4 hours by heating the products in a
circulating air oven at the rated temperature and a relative
humidity not exceeding 20%.
connecting wire
KP/MKP
CBA282
Fig.20 Construction.
FOR KP/MKP 2500 V (2222 375 91...)
Aluminium foil
144x12(halfpage)
polypropylene film
MKP metallized polypropylene film
metal spray layer
connecting wire
CBA283
Fig.21 Construction.
2000 Feb 01
35
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CHARACTERISTICS
Capacitance
CBA829
296x12(full_width)
8
∆C/C
(%)
4
max.
0
typical
-4
min.
-8
-50
0
50
100
Tamb (°C)
Fig.22 Capacitance change as a function of ambient temperature.
Impedance
CBA285
296x12(full_width)
10 3
1.5
Impedance
(Ω)
10 1
; 16
3.9
12
10 2
nF
33
00200
; 10
0-2
00V
500
nF
nF
;1
V
00
nF
;6
30
47
V
n
10 F; 1
0n
00
0V
F;
63
0V
0V
10 0
10 -1
10 -2
10 4
10 5
10 6
10 7
10 8
Fig.23 Impedance as a function of frequency: typical curves.
2000 Feb 01
36
f (Hz)
10
9
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Maximum DC voltage as a function of temperature
CBA748
1.2
296x12(full_width)
factor
1.0
0.8
0.6
0.4
0.2
0
-60
-40
-20
0
20
40
60
80
Fig.24 Multiplying factor as a function of temperature.
2000 Feb 01
37
100
Tamb (°C)
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Maximum RMS voltage (sinewave) as a function of frequency
CBA286
3
296x12(full_width)
10
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. nF
F
2
2. .7 n
4
nF
10 nF
22 7 nF
4
nF
0
F
10 0 n
22
10 1
10 3
10 4
10 5
10 6
10 7
10 8
f (Hz)
Fig.25 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 630 V.
CBA830
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0 F
1. n
2
2. 7 nF
4.
nF
10 nF
22 7 nF
4
nF
0
10 0 nF
22
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.26 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 630 V.
2000 Feb 01
38
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA287
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
pF
0
pF
10
0
22 pF
0
47 nF
0
1. nF
2
2. nF
7
4. nF
22
nF
47 nF
0
10
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.27 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1000 V.
CBA831
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
pF
0
pF
10
0
22 pF
0
F
47
n
0
1. nF
2
2. nF
7
4. nF
22
nF
47 nF
0
10
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.28 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1000 V.
2000 Feb 01
39
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA288
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. 2 nF F
2. 7 n F
4. 0 n F
1 n
22
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.29 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1600 V.
CBA832
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. 2 nF F
2. 7 n
4. 0 nF F
1 2n
2
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.30 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1600 V.
2000 Feb 01
40
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA940
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0 F
1. .2 n
2
nF
10
7
4.
nF
22
nF
47
nF
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.31 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1600 V
(monitor type).
CBA941
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. 2 nF
2.
7
4.
nF
10
nF
22
nF
47
nF
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.32 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1600 V
(monitor type).
2000 Feb 01
41
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA289
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
pF
0
10
pF
0 F
22 0 p F
47 .0 n nF
1 2
2. 7 nF
4. 0 nF
1
10 1
10 3
10 4
10 5
10 6
10 7
10 8
f (Hz)
Fig.33 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2000 V.
CBA833
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
pF
0
10
pF
0 F
22 0 p F
47 .0 n F
1 2n
2. 7 nF
4. nF
10
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.34 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2000 V.
2000 Feb 01
42
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA942
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. nF
2
2.
nF
7
4.
nF
10 nF
15
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.35 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2000 V
(monitor type).
CBA943
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
0
1.
2
10 5
nF
10 4
nF
2.
nF
7
nF
10 nF
15
4.
10 1
10 3
10 6
10 7
f (Hz)
10 8
Fig.36 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2000 V
(monitor type).
2000 Feb 01
43
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA290
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0 F
1. n
2
2. 7 nF
4.
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.37 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2500 V.
CBA834
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
nF
0
1. 2 nF
2. 7 nF
4.
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.38 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2500 V.
2000 Feb 01
44
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
CBA944
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
0
1.
2
nF
2.
nF
10
nF
7
4.
nF
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.39 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2500 V
(monitor type).
CBA945
296x12(full_width)
10 3
KP/MKP 375
AC Voltage
(V)
10 2
0
1.
nF
2
2.
nF
10
nF
7
4.
nF
10 1
10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.40 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2500 V
(monitor type).
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by I ac = ω × C × U ac .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 25 to 40.
2000 Feb 01
45
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Tangent of loss angle
CBA958
296x12(full_width)
102
dissipation
factor
(x 10-4)
1. KP/MKP
2. KP/MKP
3. KP/MKP
(3)
10.0 and 15.0 mm pitch all versions
22.5 mm pitch, 1000, 1600, 2000 and 2500V versions
22.5 mm pitch, 630V versions
27.5 mm pitch 630, 1000, 1600 and 2000V versions
27.5 mm pitch, 630V versions
(2)
(1)
101
100
10 2
10 3
10 4
10 5
10 6
frequency (Hz)
Fig.41 Tangent of loss angle as a function of frequency: typical curves.
CBA959
296x12(full_width)
102
1. KP/MKP
dissipation
factor
(x 10-4)
2. KP/MKP
3. KP/MKP
(3)
10.0 and 15.0 mm pitch all versions
22.5 mm pitch, 1000, 1600, 2000 and 2500V versions
22.5 mm pitch, 630V versions
27.5 mm pitch 630, 1000, 1600, 2000 and 2500V versions
27.5 mm pitch, 630V versions
(2)
(1)
101
100
10 2
10 3
10 4
10 5
frequency (Hz)
Fig.42 Tangent of loss angle as a function of frequency: maximum curves.
2000 Feb 01
46
10 6
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Insulation resistance
CBA647
296x12(full_width)
10 6
RC
(s)
10 5
10 4
0
20
40
60
80
Tamb (°C)
100
Fig.43 RC product as a function of ambient free air temperature; typical curve.
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
CBA757
12
296x12(full_width)
∆T
(°C) 10
8
6
4
2
0
-60
-40
-20
0
20
40
60
80
100
Tamb (°C)
Fig.44 Maximum allowed component temperature rise as a function of the ambient temperature.
2000 Feb 01
47
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Heat conductivity
Table 1
ORIGINAL PITCH
(mm)
bmax
(mm)
10
15
22.5
27.5
4.0
4.0
5.0
−
−
4.5
4.5
6.0
−
−
5.0
5.0
6.0
12.0
13.0
5.5
6.0
6.5
13.0
15.0
6.0
6.0
6.5
13.0
15.0
6.5
6.5
8.0
15.0
17.0
7.0
−
8.0
15.0
17.0
7.5
−
9.0
17.0
18.0
8.0
−
9.0
17.0
20.0
8.5
−
11.0
18.0
20.0
9.0
−
11.0
18.0
22.0
9.5
−
12.0
20.0
22.0
10.0
−
12.0
20.0
23.0
10.5
−
22.0
25.0
−
11.0
−
−
−
25.0
11.5
−
−
−
27.0
12.0
−
−
−
27.0
12.5
−
−
−
30.0
13.0
−
−
−
30.0
13.5
−
−
−
30.0
14.0
−
−
−
30.0
14.5
−
−
−
33.0
15.0
−
−
−
33.0
15.5
−
−
−
37.0
16.0
−
−
−
37.0
Power dissipation and maximum component temperature rise
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a
function of the free air ambient temperature.
The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”.
The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more
details) or calculated by ∆T = P ⁄ G :
• ∆T = component temperature rise (°C).
• P = power dissipation of the component (mW).
• G = heat conductivity of the component (mW/°C).
2000 Feb 01
48
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
Measuring the component temperature
A thermocouple must be attached to the capacitor body; see Fig.45.
144x12(halfpage)
thermocouple
CBA771
Fig.45 Mounting the thermocouple.
The temperature is measured in unloaded (Tamb) and maximum loaded
condition (Tc).
The temperature rise is given by: ∆T = T c – T amb .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
2000 Feb 01
49
KP/MKP 375
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Application note and limiting conditions
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
dU
dU 2
2 × ∫  -------- × dt < U Rdc ×  --------
 dt  rated
 dt 
0
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits in Fig.44.
Example
C = 10 nF - 1600 V, KP/MKP.
This is a signal as in Fig.46 with:
Up-p = 1200 V; Up = 1100 V; T1 = 12 µs; T2 = 64 µs.
The ambient temperature is 50 °C
Checking the conditions:
1. The peak voltage Up = 1100 V is lower than 1600 V (DC).
2. The peak-to-peak voltage 1200 V is lower than 2 × 2 × 500 V ( AC ) = 1414 U p – p .
3. The voltage pulse slope: 320 V/µs is much lower than 7000 V/µs.
4. The dissipated power is 170 mW as calculated with Fourier terms.
170mW
This gives a temperature rise of ----------------------------- = 10 °C which is allowed according Fig.44 for an ambient temperature
17mW ⁄ °C
of 50 °C.
296x12(full_width)
voltage
Up
Up-p
time
T1
CBA295
T2
Fig.46 Voltage signal.
2000 Feb 01
50
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
MARKING
Product marking
COUNTRY OF ORIGIN: BELGIUM
The capacitors are marked on the top (see Fig.47) with the
following information:
1. Capacitance code in accordance with “IEC 60062”
144x12(halfpage)
2n2 J 1700Vp-p
KP/MKP M1
2. Capacitance tolerance: J = ±5%; A = 3.5%
BC 375
3. Rated peak-to-peak voltage (e.g. 1700 Vp-p)
CBB076
4. Manufacturer’s type designation (375)
5. Code for dielectric material (KP/MKP)
6. Manufacturer’s emblem (only for original
pitch ≥15 mm)
7. Year and month of manufacturing code (only for
original pitch ≥22.5 mm).
Fig.47 Example of marking.
COUNTRY OF ORIGIN: PRC (PEOPLE’S REPUBLIC OF CHINA)
The capacitors are marked in ink on the front (see Fig.48)
with the following information:
1. Capacitance code in accordance with “IEC 60062”
144x12(halfpage)
2. Capacitance tolerance: J = ±5%; A = 3.5%
2n2 J 2000V
375 KP/MKP 9910
3. Rated d.c. voltage (e.g. 2000 V)
4. Manufacturer’s type designation (375)
5. Code for dielectric material (KP/MKP)
6. Year and week of manufacturing code.
CBA446
Fig.48 Example of marking.
2000 Feb 01
51
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
Package marking
The package containing the capacitors is marked as shown in Fig.49.
Barcode label marking
LINE
MARKING EXPLANATION
1
Manufacturer's name
2
Country of origin
3
Sub-family
4
Type description
5
Capacitance value in µF, tolerance, voltage
and climatic category
(“IEC 60068-1”)
6
Batchnumber (only for capacitors from PRC)
7
• Country of origin: Belgium
Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
• Country of origin: China
Preference origin code: N
Country of origin in code: 260 (PRC)
Responsible production centre: 07
8
Product type description
9
Quantity and production period, year and
week code
10
Product code (12NC)
Fig.49 Barcode label.
2000 Feb 01
52
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
KP/MKP 375
QUICK REFERENCE TEST REQUIREMENTS (see note 1)
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”
load 10 N; 10 s
Bending:
“IEC 60068-2-21”
load 5 N; 4 × 90 °
Resistance to soldering heat:
“IEC 60068-2-20”
solder bath: 260 °C; 10 s
Component solvent resistance
isopropyl alcohol; 23 °C; 5 minutes
no visible damage
legible marking
∆C/C ≤ 1% +5 pF
∆tan δ ≤ 5 × 10−4
Robustness of component
Vibration:
“IEC 60068-2-6“
10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours
Shock:
“IEC 60068-2-27“
half sinewave; 490 m/s2; 11 ms
∆C/C ≤ 2% (C > 0.0056 µF)
∆C/C ≤ 3% +5 pF (C ≤ 0.0056 µF)
∆tan δ ≤ 5 × 10−4
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 105 °C
Damp heat, cyclic, test Db, first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1“
∆C/C ≤ 3% +5 pF
∆tan δ ≤ 10 × 10−4
2 hours; −55 °C
Rins ≥ 50% of specified value
Damp heat, cyclic, test Db,
remaining cycles:
“IEC 60068-2-30“
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3“
56 days; 40 °C; 90 to 95% RH
Endurance (AC):
“IEC 60384-17“
2000 hours;
1.25 × URac (RMS); 50 Hz; 85°C
∆C/C ≤ 1% +5 pF
∆tan δ ≤ 5 × 10−4
Rins ≥ 50% of specified value
∆C/C ≤ 2% (C > 0.0056 µF)
∆C/C ≤ 3% +5 pF (C ≤ 0.0056 µF)
∆tan δ ≤ 10 × 10−4
Rins ≥ 50% of specified value
2000 hours;
0.875 × URac (RMS); 50 Hz; 105°C
∆C/C ≤ 5% + 5 pF
∆tan δ ≤ 10 × 10−4
Rins ≥ 50% of specified value
Heat storage:
“IEC 60384-17“
2000 hours; 105 °C
∆C/C ≤ 3% (C > 0.0056 µF)
∆C/C ≤ 5% +5 pF (C ≤ 0.0056 µF)
∆tan δ ≤ 10 × 10−4
2000 Feb 01
53
BCcomponents
Product specification
AC and Pulse
metallized polypropylene film capacitors
TEST
KP/MKP 375
PROCEDURE
(quick reference)
REQUIREMENTS
Resistance to soldering heat with
preheating:
“IEC 60384-17”
body temperature: 105 °C;
bath temperature: 260 °C;
dwell time: 10 s
∆C/C ≤ 2% +5 pF
Passive flammability:
“IEC 60384-1”
class C
no burning
Endurance (DC):
“IEC 60384-17“
2000 hours:
1.25 × URdc; 85 °C
0.875 × URdc; 105 °C
∆C/C ≤ 3% +5 pF
∆tan δ ≤ 5 × 10−4
∆tan δ ≤ 10 × 10−4
Rins ≥ 50% of specified value
Note
1. For detailed information: see “Type detail specification HQN-384-17/104”.
2000 Feb 01
54