MEI Lead Free RoHS Compliant SCHOTTKY BARIER RECTIFIER SRF2020C THRU SRF20100C VOLTAGE RANGE CURRENT 20 to 100 Volts 16.0 Ampere FEATURES • • • • • • • • • Dual Diode device Fast switching Low forward voltage Low power loss for high efficiency High Surge capability High temperature Soldering guaranteed: 250 OC/10 seconds, 0.25” (6.35mm) lead length Also available with reverse polarity, add and “R” suffix, i.e. SRF2020R Also available in a non isolate package, SR2020C Also available in a dual diode version, SRF2020 MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Solderable per MIL-STD-202E Method 208C Polarity: as marked Mounting Position: Any, 5.0 in-lbs Torque Max Weight: 0.08 ounce, 2.24 gram ITO-220AB MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage SRF SRF SRF SRF SRF SRF SRF SRF SRD UNIT 2020C 2030C 2035C 2040C 2045C 2050C 2060C 2080C 20100C 20 30 35 40 45 50 60 80 100 Volts 14 21 25 38 32 35 42 56 70 Volts 20 30 35 40 45 50 60 80 100 Volts Maximum Average Forward Rectified Current, (Note 1) TL = 135OC Peak Forward Surge Current I(AV) 20 Amps 8.3mS single half sine wave superimposed on IFSM 150 Amps rated load (JEDEC method) Maximum Instantaneous Forward Voltage per leg @ 10.0A (Note 1) Maximum DC Reverse Current at Rated TA = 25 C DC Blocking Voltage per element (Note 1) TA = 100 OC Typical Thermal Resistance , per leg Operating Junction Temperature Range Storage Temperature Range VF O IR RθJC TJ TSTG Notes: 1. Pulse test: 300µS pulse width, 1% duty cycle 0.65 0.75 5.0 50 3.0 (-55 to +150) (-55 to +150) Volts mA O C/W O C O C MEI Lead Free RoHS Compliant RATINGS AND CHARACTERISTIC CURVES SRF2020C THRU SRF20100C