T Series Subminiature Toggle Switches Features/Benefits Models Available Compact size—small footprint Single and double pole models A PC and panel mount options available Toggle Typical Applications Hand-held telecommunications Instrumentation Medical equipment Build-A-Switch Our easy Build-A-Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches with standard options are shown on pages A-40 and A-41. Available options are shown and described on pages A-41 thru A-45. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Typical Example: Switch Function T101 (STD.) SPDT On-None-On T103 (STD.) SPDT On-Off-On T105 (STD.) SPDT Mom.-Off-Mom. T201 (STD.) DPDT On-None-On T102 SPST Off-None-On T107 SPDT On-Off-Mom. T108 SPDT On-None-Mom. T203 DPDT On-Off-On T205 DPDT Mom.-Off-Mom. T207 DPDT On-Off-Mom. T208 DPDT On-None-Mom. T211 DPDT On-On-On Actuator M (STD.) .210 high P3 (STD.) Flatted, anti-rotation, .450 high S (STD.) .370 high K Locking lever K1 Locking lever L .290 high L1 .620 high M1 .220 high S1 .410 high T 1 0 1 S Bushing H (STD.) .220 high, threaded, flat H9 (STD.) .220 high, unthreaded, flat CF Splashproof, .310 high, threaded, flat D9 .260 high, unthreaded, keyway K9 .310 high, unthreaded, keyway T .310 high, threaded, flat T9 .310 high, unthreaded, flat TD .260 high, threaded, keyway TK .310 high, threaded, keyway Y .220 high, threaded, keyway Y9 .220 high, unthreaded, keyway H Z Terminations A (STD.) Right angle, PC thru-hole AV (STD.) Vertical right angle, PC thru-hole C (STD.) PC Thru-hole V3 (STD.) Vertical mount V-bracket Z (STD.) Solder lug W Wire wrap Contact Material B (STD.) Gold Q (STD.) Silver K Gold M Silver G Gold over silver L Gold over silver Q E Seal E (STD.) Epoxy Locking Lever Actuator Finish NONE (STD.) Natural aluminum 2 Black 3 Red 7 Blue Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page A-45 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 milliohms typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level. CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). ACTUATOR: Brass, chrome plated. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page A-45 for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page A-45 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. OPERATING TEMPERATURE: – 30C to 85C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 A-39 T Series Subminiature Toggle Switches SWITCHES WITH STANDARD OPTIONS Toggle A PART NUMBER NO. POLES T101SHZQE SPDT ÑÑÑ ÑÑÑ POS. 1 POS. 2 POS. 3 ON NONE ON NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page A-42. For PC mounting information, see page A-43. T101SHZQE SPDT T102 Models: Omit terminal 2 PART NUMBER NO. POLES T201SHZQE DPDT ÑÑÑ ÑÑÑ POS. 1 POS. 2 POS. 3 ON NONE ON NOTE: For PC termination, replace ‘Z’ with ‘C’. For panel mounting information, see page A-42. For PC mounting information, see page A-43. T201SHZQE DPDT ON ÑÑ ÑÑ ON OFF ON MOM. OFF MOM. ON OFF MOM. ON NONE MOM. POS. 1 PART NUMBER T101MH9ABE T103MH9ABE T105MH9ABE T107MH9ABE T108MH9ABE T101MH9ABE Horizontal Actuation SPDT NO. POLES SPDT POS. 2 POS. 3 NONE ON NOTE: For PC mounting information, see page A-43. MOM. = Momentary POS. 1 PART NUMBER NO. POLES T201MH9ABE DPDT ON ÑÑ ÑÑ POS. 2 POS. 3 NONE ON NOTE: For PC mounting information, see page A-43. T201MH9ABE Horizontal Actuation DPDT A-40 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 T Series Subminiature Toggle Switches SWITCH WITH STANDARD OPTIONS T101MH9AVBE SPDT A ÑÑÑ POS. 1 POS. 2 POS. 3 ON NONE ON T101MH9AVBE Vertical Actuation NOTE: For PC mounting information, see page A-44. SPDT SWITCH FUNCTION SWITCH FUNCTION POS. 1 NO. POLES SP DP MODEL NO. T101 (STD.) ON T103 (STD.) T105 (STD.) CONNECTED TERMINALS ÑÑÑÑ ÑÑÑÑ POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 SCHEMATIC NONE ON ON OFF ON MOM. OFF MOM. T107 ON OFF MOM. T108 ON NONE MOM. T102 OFF NONE ON T201 (STD.) ON NONE ON T203 ON OFF ON T205 MOM. OFF MOM. T207 ON OFF MOM. T208 ON NONE MOM. T211* ON ON ON 2-3 OPEN 2-1 SPDT OPEN N/A 3-1 2-3,5-6 OPEN 2-1,5-4 2-3,5-6 2-3,5-4 2-1,5-4 MOM. = Momentary All models SPST DPDT * Wiring for 3-way switch, see page L-29. with all options when ordered with G, L, M or Q contact material. ACTUATOR ACTUATOR ACTUATOR FINISH M (STD.) .210 HIGH S (STD.) .370 HIGH M1 .220 HIGH S1 1 2 1 2 Standard with A, AV or V3 terminations. L .410 HIGH .290 HIGH Standard with Z, C or W terminations. L1 .620 HIGH P3 (STD.) ANTI-ROTATION, FLATTED, .450 HIGH 1 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. 2 2 Actuators shown with T, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. 1 Available with T & T9 bushings only. NOTE: Dress nut part number 709901201 supplied standard with threaded bushing. All actuators have chrome finish (except K & K1). No finish selection required. C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 A-41 Toggle PART NUMBER NO. POLES T Series Subminiature Toggle Switches ACTUATOR ACTUATOR ACTUATOR FINISH K K1 LOCKING LEVER Locking Positions LOCKING LEVER Toggle A –01 & –02 Models 2 Position lock Not available with CF bushing option. –03 & –11 Models 3 Position lock OPTION CODE K & K1 ACTUATOR CAP FINISH NONE 2 (STD.) NATURAL AL. 3 RED ANODIZED AL. 7 BLUE ANODIZED AL. NOTE: Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind. Bushing option code not required. Not available with TX05 & TX07 models. –08 Models 1 Position lock BLACK ANODIZED AL. BUSHING H (STD.) .220 HIGH THREADED, FLAT H9 (STD.) .220 HIGH UNTHREADED, FLAT Y .220 HIGH THREADED, KEYWAY Y9 .220 HIGH UNTHREADED, KEYWAY T .310 HIGH THREADED, FLAT T9 .310 HIGH UNTHREADED, FLAT TD D9 CF H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations. TK K9 .310 HIGH THREADED, KEYWAY .310 HIGH UNTHREADED, KEYWAY .260 HIGH THREADED, KEYWAY SPLASHPROOF, .310 HIGH THREADED, FLAT .260 HIGH UNTHREADED, KEYWAY IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. 10 - 48 BUSHING With Standard Locking Ring Without Locking Ring A-42 1/4 IN. BUSHING PANEL MOUNTING Without Locking Ring With Standard Locking Ring With Standard Locking Ring With Small Locking Ring Without Locking Ring C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 T Series Subminiature Toggle Switches TERMINATIONS Z C (STD.) SOLDER LUG SP DP (STD.) PC THRU-HOLE SP A DP Toggle Not available with K, L or M contact materials. W WIRE WRAP PC MOUNTING SP DP T102 – omit center hole. A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING T101MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 SPDT Not available with T102 model. A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING T201MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 DPDT C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 A-43 T Series Subminiature Toggle Switches TERMINATIONS AV (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE Toggle A PC MOUNTING T101MH9AVBE Vertical Actuation Actuator Shown In Pos. 1 T102 Models: Omit terminal 2 SPDT NOTE: Terminal bend radii and lead-in manufacturing option. AV (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING T201MH9AVBE Vertical Actuation Actuator Shown In Pos. 1 DPDT NOTE: Terminal bend radii and lead-in manufacturing option. V3 (STD.) VERTICAL MOUNT, V-BRACKET PC MOUNTING T101MH9V3BE T102 Models: Omit terminal 2 SPDT T102 Models: Omit center hole. Actuator Shown In Pos. 1 A-44 C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 T Series Subminiature Toggle Switches TERMINATIONS V3 (STD.) VERTICAL MOUNT, V-BRACKET A PC MOUNTING Toggle T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CODE CONTACT MATERIAL RATINGS GOLD 1 B (STD.) GOLD 1 K LOW LEVEL / DRY CIRCUIT TIN-LEAD 6 SILVER 5 Q (STD.) 45 SILVER 4,5 M 23 GOLD OVER SILVER 2,3 0 4 VA MAX. 0.4 MAX @ 20 V AC OR DC MAX. MAX TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. POWER TIN-LEAD 6 GOLD 3 G L TERMINAL PLATING LOW LEVEL / DRY CIRCUIT OR POWER TIN-LEAD 6 TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. CONTACT MATERIAL / APPLICATION RECOMMENDATIONS – SEE CHART, PAGE L-31. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A, AV, V3 & W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. Q contact material standard with C & Z terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. with all options when ordered with G, L, M or Q contact material. SEAL E (STD.) EPOXY SEAL C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: 800-635-5936 Fax: 617-926-6846 Europe Sales Tel: +44-1536-521147 Fax: +44-1536-411602 Asia Sales Tel: +852-2798-6393 Fax: +852-2751-9926 Rev. A 8/99 A-45