H T-13/4 (5 mm), Wide Viewing Angle, High Intensity LED Lamps HLMA-VH00 HLMA-VL00 HLMP-V100 HLMP-V500 Technical Data Features Description • Outstanding LED Material Efficiency • Extremely Wide Horizontal Viewing Angle • High Light Output over a Wide Range of Currents • Untinted, Non-diffused Lens • Choice of Four Colors: 644 nm Red, 590 nm Amber, 570 nm Green, and 615 nm Orange These high intensity LED lamps provide the user with an extremely wide 60° (horizontal) by 30° (vertical) oval shaped radiation pattern. Available in TS AlGaAs red, AlInGaP amber, AlInGaP orange, and GaP green colors, these untinted nondiffused T-13/4 (5 mm) LEDs are an excellent choice for outdoor applications requiring an extremely wide field of vision and high brightness. Outline Drawing Device Selection Guide 13.97 ± 0.76 (0.550 ± 0.030) 8.71 ± 0.38 (0.343 ± 0.015) Applications • Outdoor Message Boards • Safety Lighting Equipment • Changeable Message Signs • Alternative to Incandescent Lamps Amber λd = 590 nm Red-Orange λd = 615 nm Red λd = 644 nm Green λd = 570 nm HLMA-VL00 HLMA-VH00 HLMP-V100 HLMP-V500 1.02 MAX (0.040) NOTE 1 20.32 MIN (0.800) 0.51 SQUARE (0.020) NOMINAL 2.54 ± ± 0.76 0.25 (0.100 ± ± 0.030) 0.010) 2.54 ± 0.25 (0.100 ± 0.010) 2.54 ± .025 (0.100 ± 0.010) 5.08 ± 0.25 (0.200 ± 0.010) NOTES: 1. LEAD ORIENTATION: DEVICE TYPE CENTER LEAD HLMP-V100 COMMON ANODE HLMP-V500 COMMON CATHODE HLMA-VL00 COMMON CATHODE HLMA-VH00 COMMON CATHODE OUTER LEADS CATHODE ANODE ANODE ANODE 2. ALL DIMENSIONS ARE IN MM (INCHES). 5.59 ± 0.25 (0.220 ± 0.010) 1-56 5964-9292E Absolute Maximum Ratings at TA = 25°C Parameter HLMP-V100 HLMP-V500 Units 60[4,5] 60[4,5] 60 50 mA Peak Forward Current[2,3] 400 400 600 180 mA Average Input Power[2] 120 120 120 110 mW Reverse Voltage (IR = 200 µA) 5 5 5 5 V Operating Temperature Range -40 to +100 -40 to +100 -55 to +85 -20 to +100 °C Storage Temperature Range -55 to +100 -55 to +100 -55 to +100 -55 to +100 °C DC Forward HLMA-VL00 HLMA-VH00 Current[1,3] Junction Temperature °C 110 Soldering Temperature [1.59 mm (0.06 in.) below seating plane] 260°C for 5 seconds Notes: 1. Derate linearly as shown in Figure 5. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Average Power as specified in Figure 6. 3. Specified with both die powered simultaneously. 4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance. 5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative. Optical Characteristics at TA = 25°C Part Number Luminous Intensity IV (mcd) @ 40 mA[1] Min. Typ. Peak Wavelength λpeak (nm) Typ. Color, Dominant Wavelength λd[2] (nm) Typ. Viewing Angle 2θ1/2 Degrees[3] Typ. HLMA-VL00 212 460 592 590 60° horizontal 30° vertical HLMA-VH00 200 460 621 615 HLMP-V100 500 1000 654 644 60° horizontal 30° vertical 85 HLMP-V500 112 270 568 570 60° horizontal 30° vertical 595 Luminous Efficacy ηV (lm/w) 480 263 Notes: 1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 2 θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. Electrical Characteristics at TA = 25°C Part Number Forward Voltage VF (Volts) @ IF = 40 mA Typ. Max. Reverse Breakdown VR (Volts) @ IR = 200 µA Min. Capacitance C (pF) VF = 0, f = 1 MHz Typ. Thermal Resistance RθJ-PIN (°C/W) Speed of Response τs (ns) Time Constant e-t/τs Typ. HLMA-VL00 1.90 2.4 5 120 100 13 HLMA-VH00 1.90 2.4 5 120 100 13 HLMP-V100 1.85 2.4 5 50 115 26 HLMP-V500 2.20 3.0 5 20 100 171 1-57 200 320 280 240 200 160 120 80 40 0 1.0 1.5 2.0 2.5 IF – FORWARD CURRENT – mA (BOTH DIE POWERED SIMULTANEOUSLY) 600 IF – FORWARD CURRENT – mA (BOTH DIE POWERED SIMULTANEOUSLY) 200 100 3.0 10 1 1.5 2.0 VF – FORWARD VOLTAGE – V RED 0.6 0.4 0.2 2.6 1.3 2.4 1.2 1.1 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 30 40 50 Figure 3. Relative Luminous Intensity vs. Forward Current. 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 20 40 60 80 100 120 140 160 180 IPEAK – PEAK FORWARD CURRENT – mA Figure 4c. Relative Efficiency vs. Peak Forward Current, HLMP-V500. 2.6 2.8 3.0 3.2 0.6 0.5 0.4 0.1 0.0 40 80 120 160 200 240 280 320 360 400 Figure 4a. Relative Efficiency vs. Peak Forward Current, HLMA-VL00/VH00. IF – FORWARD CURRENT – mA (BOTH DIE POWERED SIMULTANEOUSLY) ηPEAK – RELATIVE EFFICIENCY (NORMALIZED AT 40 mA) 1.2 2.4 0.7 1 IPEAK – PEAK FORWARD CURRENT – mA 1.3 2.2 0.8 0.2 0 60 2.0 1.0 0.3 0.2 IF – FORWARD CURRENT – mA 0 1.9 0.9 0.4 0 0 20 1 1.7 Figure 2c. Forward Current vs. Forward Voltage, HLMP-V500. ηV– RELATIVE EFFICIENCY (NORMALIZED AT 40 mA) 0.8 10 10 VF – FORWARD VOLTAGE – V 2.2 ηV – RELATIVE EFFICIENCY (NORMALIZED AT 40 mA) RELATIVE LUMINOUS INTENSITY ORANGE & AMBER GREEN 1.0 1-58 4.5 4.0 3.5 Figure 2b. Forward Current vs. Forward Voltage, HLMP-V100. 1.6 1.2 3.0 100 VF – FORWARD VOLTAGE – V Figure 2a. Forward Current vs. Forward Voltage, HLMA-VL00/VH00. 1.4 2.5 50 RθJA = 350° C/W 40 RθJA = 480° C/W 30 20 10 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 5a. Maximum Forward DC Current vs. Ambient Temperature, HLMA-VL00/VH00. 10 20 40 100 200 400 600 Figure 4b. Relative Efficiency vs. Peak Forward Current, HLMP-V100. 70 60 4 IPEAK – PEAK FORWARD CURRENT – mA IF – FORWARD CURRENT – mA (BOTH DIE POWERED SIMULTANEOUSLY) IF – FORWARD CURRENT – mA 400 360 70 60 50 RθJA = 350° C/W 40 RθJA = 480° C/W 30 20 10 0 0 20 40 60 80 100 85 TA – AMBIENT TEMPERATURE – °C Figure 5b. Maximum Forward DC Current vs. Ambient Temperature, HLMP-V100. 60 50 RθJA = 350° C/W 40 RθJA = 480° C/W 30 20 10 0 0 20 40 60 80 f ≥ 100 Hz 120 100 RθJA = 350° C/W 80 RθJA = 480° C/W 60 40 20 0 0 100 TA – AMBIENT TEMPERATURE – °C Figure 5c. Maximum Forward DC Current vs. Ambient Temperature, HLMP-V500. 100 RθJA = 350° C/W RθJA = 480° C/W 40 20 0 0 20 40 60 80 80 100 RθJA = 350° C/W 80 RθJA = 480° C/W 60 40 20 0 0 20 40 60 80 100 85 TA – AMBIENT TEMPERATURE – °C Figure 6b. Maximum Allowable Average Power vs. Ambient Temperature, HLMP-V100. 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) TA – AMBIENT TEMPERATURE – °C Figure 7a. Relative Intensity vs. Angle, HLMA-VL00/VH00 Horizontal Axis. 1.0 NORMALIZED LUMINOUS INTENSITY Figure 6c. Maximum Allowable Average Power vs. Ambient Temperature, HLMP-V500. 60 100 1.0 120 60 40 Figure 6a. Maximum Allowable Average Power vs. Ambient Temperature, HLMA-VL00/VH00. f ≥ 100 Hz 80 20 f ≥ 100 Hz 120 TA – AMBIENT TEMPERATURE – °C NORMALIZED LUMINOUS INTENSITY TIME AVERAGE POWER (mW) (BOTH DIE POWERED SIMULTANEOUSLY) 140 TIME AVERAGE POWER (mW) (BOTH DIE POWERED SIMULTANEOUSLY) 140 140 TIME AVERAGE POWER (mW) (BOTH DIE POWERED SIMULTANEOUSLY) IF – FORWARD CURRENT – mA (BOTH DIE POWERED SIMULTANEOUSLY) 70 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) Figure 7b. Relative Intensity vs. Angle, HLMA-VL00/VH00 Vertical Axis. 1-59 NORMALIZED LUMINOUS INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) Figure 8a. Relative Intensity vs. Angle, HLMP-V100 Horizontal Axis. NORMALIZED LUMINOUS INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) Figure 8b. Relative Intensity vs. Angle, HLMP-V100 Vertical Axis. NORMALIZED LUMINOUS INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) Figure 9a. Relative Intensity vs. Angle, HLMP-V500 Horizontal Axis. 1-60 NORMALIZED LUMINOUS INTENSITY 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 -20 -40 -60 -80 -100 ANGULAR DISPLACEMENT (DEGREES) Figure 9b. Relative Intensity vs. Angle, HLMP-V500 Vertical Axis. 1-61