Advanced Technical Information IFAV = 2x40 A VRRM = 60 V V F = 0.51 V Power Schottky Rectifier with common cathode VRSM VRRM V V 60 60 DSSK 80-006BR A Type C A ISOPLUS 247TM A DSSK 80-006BR C A Isolated back surface * C = Cathode, A = Anode Symbol Conditions Maximum Ratings IFRMS IFAV IFAV TC = 120°C; rectangular, d = 0.5 TC = 120°C; rectangular, d = 0.5; per device IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine EAS IAS = 20 A; L = 100 µH; TVJ = 25°C; non repetitive IAR VA =1.5 • VRRM typ.; f=10 kHz; repetitive (dv/dt)cr 70 40 80 A A A 600 A 20 mJ 2 A tbd TVJ TVJM Tstg V/µs -55...+150 150 -55...+150 °C °C °C 155 W 20...120 N 2500 V~ Ptot TC = 25°C FC mounting force with clip VISOL 50/60 Hz, RMS, t = 1 minute, leads-to-tab Weight typical Symbol Conditions IR VR = VRRM; TVJ = 25°C VR = VRRM; TVJ = 100°C 22 200 mA mA VF IF = 40 A; IF = 40 A; IF = 80 A; 0.51 0.55 0.74 V V V 0.8 K/W K/W 6 Features • International standard package • Very low VF • Extremely low switching losses • Low IRM-values • Isolated and UL registered E153432 Applications • Rectifiers in switch mode power supplies (SMPS) • Free wheeling diode in low voltage converters Advantages • High reliability circuit operation • Low voltage peaks for reduced protection circuits • Low noise switching • Low losses g Dimensions see Outlines.pdf Characteristic Values typ. max. TVJ = 125°C TVJ = 25°C TVJ = 125°C RthJC RthCH 0.25 IXYS reserves the right to change limits, test conditions and dimensions. © 2004 IXYS All rights reserved 427 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-1