2.7x3.4mm SURFACE MOUNT LED LAMP AA2734SRSGC SUPER BRIGHT RED SUPER BRIGHT GREEN Features Description l BOTH with Gallium Aluminum Arsenide Red Light Emitting l 2.7mm X 3.4mm SMT LED, 1.5mm HEIGHT ONLY. CHIPS CAN BE CONTROLLED SEPARATELY. l SUITABLE PROCESS. FOR ALL SMT ASSEMBLY AND SOLDER l AVAILABLE l IDEAL ON TAPE AND REEL. FOR BACKLIGHTING. l PACKAGE: 1000PCS / REEL. The Super Bright Red source color devices are made Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e SUPER BRIGHT RED (GaAlAs) AA2734SRSGC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT GREEN (GaP) Mi n . Ty p . 7 30 36 WATER C LEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 150 V i ew i n g An g le 2θ1/2 120° Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λp e a k Peak Wavelength λD D omi nate Wavelength ∆λ1/2 C D ev i c e Super Bri ght Red Super Bri ght Green VF Forward Voltage IR Reverse C urrent 660 565 Super Bri ght Red Super Bri ght Green 640 568 Super Bri ght Red Super Bri ght Green 45 15 Spectral Li ne Half-wi dth Super Bri ght Red Super Bri ght Green C apaci tance Ty p . Super Bri ght Red Super Bri ght Green All Max . Un its Tes t C o n d i t i o n s nm I F =20mA nm I F =20mA nm I F =20mA pF VF=0V;f=1MHz V I F =20mA uA V R = 5V 20 30 1.85 2.2 2.5 2.5 10 Absolute Maximum Ratings at TA=25°°C P ar am et er S u p er B r i g h t R ed Su p er B r i g h t Gr een Un its Power di ssi pati on 100 105 mW Peak Forward C urrent [1] 155 140 mA D C Forward C urrent 30 Reverse Voltage Operati ng/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu 25 5 -40°C To +85°C DATE: MAR/28/2003 DRAWN: D.H.FANG mA V PAGE: 2 OF 4 Super Bright Red / Super Bright Green SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu AA2734SRSGC DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 3 OF 4 AA2734SRSGC SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 4 OF 4