4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP ATTENTION Part Number: AA4040VGC/A GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description SINGLE COLOR. The Green source color devices are made with InGaN on SUITABLE FOR ALL SMT ASSEMBLY AND G-SiC Light Emitting Diode. SOLDER PROCESS. Static electricity and surge damage the LEDS. AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic IDEAL FOR BACKLIGHTING. glove when handling the LEDs. PACKAGE : 500PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. ROHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG6303 REV NO: V.2 DATE: MAR/15/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002080 Selection Guide Dice Part No. AA4040VGC/A Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 70 200 90° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD[1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG6303 REV NO: V.2 DATE: MAR/15/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002080 Green AA4040VGC/A SPEC NO: DSAG6303 REV NO: V.2 DATE: MAR/15/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002080 AA4040VGC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG6303 REV NO: V.2 DATE: MAR/15/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002080 PACKING & LABEL SPECIFICATIONS AA4040VGC/A SPEC NO: DSAG6303 REV NO: V.2 DATE: MAR/15/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1201002080