XPower PRELIMINARY SPEC Part Number : AAD1-1010QB9ZC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z PLCC-4 PACKAGE. z SINGLE COLOR. z HIGH LUMINANCE. z HIGH POWER,OPERATING CURRENT @350mA. z SUITABLE FOR ALL SMT ASSEMBLY METHODS. z PACKAGE : 300PCS / REEL. Applications z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z traffic signaling. z RoHS COMPLIANT. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. Application Note z portable light source (e.g. bicycle flashlight). Static electricity and surge damage the LEDS. z signal and symbol luminaire for orientation. It is recommended to use a wrist band or anti-electrostatic z marker lights (e.g. steps, exit ways, etc). glove when handling the LEDs. z decorative and entertainment lighting. All devices, equipment and machinery must be electrically z indoor and outdoor commercial and residential architectural lighting. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892 Selection Guide Dice Part No. AAD1-1010QB9ZC Lens Type BLUE (AlInGaN) WATER CLEAR luminous Intensity [2] Iv(cd)@ 350 mA Φv (lm) [2] @ 350 mA Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 10.5 18 7 12 20° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 1.22 W Reverse Voltage VR not designed for reverse operation V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +85 °C DC Forward Current [1] IF 350 mA Peak Forward Current [2] IFM 500 mA Thermal resistance [1] Rth 55 °C/W Notes: 1.Results from mounting on PC board FR4(pad size≥100mm2 per pad), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Wavelength at peak emission [Typ.] IF=350mA λpeak 464 nm Dominant Wavelength [Typ.] IF=350mA λdom [1] 466 nm Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Δλ 30 nm Viewing angle at 50%ΦV θ 20 ° [Typ.] Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] Forward Voltage IF=350mA [Max.] 2.7 VF [2] 3.5 V 3.8 IR not designed for reverse operation μA Temperature coefficient of λpeak IF=350mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.15 nm/ °C Temperature coefficient of λdom IF=350mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.13 nm/ °C Temperature coefficient of VF IF=350mA, -10°C≤ T≤100°C [Typ.] TCV -2.0 mV/ °C Reverse Current (VR=5V) [Max.] Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892 AAD1-1010QB9ZC SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892 AAD1-1010QB9ZC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892 PACKING & LABEL SPECIFICATIONS AAD1-1010QB9ZC SPEC NO: DSAH1973 REV NO: V.1 DATE: FEB/08/2007 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1201001892