KINGBRIGHT ACSA02-41CGKWA-F01

SURFACE MOUNT DISPLAY
Part Number: ACSA02-41CGKWA-F01
Green
Features
Description
z 0.2INCH DIGIT HEIGHT.
The Green source color devices are made with InGaAlP on
z LOW CURRENT OPERATION.
GaAs substrate Light Emitting Diode.
z EXCELLENT CHARACTER APPEARANCE.
z I.C. COMPATIBLE
z MECHANICALLY RUGGED.
z GRAY FACE,WHITE SEGMENT.
z PACKAGE : 650PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG0259
REV NO: V.3
DATE: JUN/18/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1351000429
Selection Guide
Part No.
Dice
ACSA02-41CGKWA-F01 Green (InGaAlP)
Lens Type
WHITE DIFFUSED
Iv (ucd) [1]
@ 10mA
Description
Min.
Typ.
4700
26000
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG0259
REV NO: V.3
DATE: JUN/18/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1351000429
Green
ACSA02-41CGKWA-F01
SPEC NO: DSAG0259
REV NO: V.3
DATE: JUN/18/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1351000429
ACSA02-41CGKWA-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG0259
REV NO: V.3
DATE: JUN/18/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1351000429
PACKING & LABEL SPECIFICATIONS
ACSA02-41CGKWA-F01
SPEC NO: DSAG0259
REV NO: V.3
DATE: JUN/18/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1351000429