KINGBRIGHT AM27SGC09

SUBMINIATURE SOLID STATE LAMP
Part Number: AM27SGC09
Features
Super Bright Green
Description
SUBMINIATURE PACKAGE.
The Super Bright Green source color devices are made with
WIDE VIEWING ANGLE.
Gallium Phosphide Green Light Emitting Diode.
Z-BEND LEAD.
LONG LIFE - SOLID STATE RELIABILITY.
LOW PACKAGE PROFILE.
PACKAGE :1000PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB9348
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1202000350
Selection Guide
Part No.
Dice
AM27SGC09
Lens Type
Super Bright Green (GaP)
WATER CLEAR
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2>1/2
36
80
20°
Notes:
1. ?1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Hpeak
Peak Wavelength
Super Bright Green
HD [1]
Dominant Wavelength
LH1/2
Max.
Units
Test Conditions
565
nm
IF=20mA
Super Bright Green
568
nm
IF=20mA
Spectral Line Half-width
Super Bright Green
30
nm
IF=20mA
C
Capacitance
Super Bright Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Green
2.2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
62.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
5
V
Power dissipation
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB9348
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1202000350
Super Bright Green
AM27SGC09
SPEC NO: DSAB9348
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1202000350
AM27SGC09
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAB9348
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1202000350
PACKING & LABEL SPECIFICATIONS
AM27SGC09
SPEC NO: DSAB9348
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1202000350