3.0x1.0 mm SMD CHIP LED LAMP APA3010SURC HYPER RED Features Description !3.0mmx1.0mm SMT LED, 2.0mm THICKNESS. The Hyper Red source color devices are made !LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light Emitting !WIDE VIEWING ANGLE. Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 1 OF 4 Selection Guide Par t No . Dic e APA3010SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 50 120 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 640 nm IF=20mA Hyper Red 6 28 nm IF=20mA Spectral Line Halfwidth Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r H y p e r R ed Un it s Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 2 OF 4 Hyper Red APA3010SURC SPEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 3 OF 4 APA3010SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 4 OF 4