3.0x2.0mm RIGHT ANGLE SMD LED Part Number: APBDA3020CGKSYKC PRELIMINARY SPEC Green Super Bright Yellow Features Description z 3.0mmx2.0mm SMT LED,2.8mm THICKNESS. The Green source color devices are made with InGaAlP on z LOW POWER CONSUMPTION. GaAs substrate Light Emitting Diode. z VARIOUS COLORS AND LENS TYPES AVAILABLE. The Super Bright Yellow device is made with DH InGaAlP z IDEAL FOR BACK LIGHT AND INDICATOR (on GaAs substrate) light emitting diode chip. z PACKAGE : 2000PCS / REEL. z WHEN SOLDERED IN THE SIDEVIEW CONFIGURATION, THE MAXIMUM SHEAR TOLERANCE OF THE EPOXY LENS IS 300G. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203006139 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 180 320 480 750 Green (InGaAlP) APBDA3020CGKSYKC Viewing Angle [1] 2θ1/2 15° WATER CLEAR Super Bright Yellow (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 590 nm IF=20mA Green Super Bright Yellow 570 590 nm IF=20mA Spectral Line Half-width Green Super Bright Yellow 20 20 nm IF=20mA C Capacitance Green Super Bright Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Green Super Bright Yellow 2.1 2 2.5 2.5 V IF=20mA IR Reverse Current Green Super Bright Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 150 175 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203006139 APBDA3020CGKSYKC Green SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203006139 Super Bright Yellow SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203006139 APBDA3020CGKSYKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203006139 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG9429 REV NO: V.6 APPROVED: WYNEC CHECKED: Allen Liu APBDA3020CGKSYKC DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203006139