KINGBRIGHT APTL3216EC

3.2x1.6mm SMD CHIP LED LAMP
PRELIMINARY SPEC
Part Number: APTL3216EC
High Efficiency Red
Features
Description
z 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
The High Efficiency Red source color devices are made with
z LOW POWER CONSUMPTION.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
z WIDE VIEWING ANGLE.
Light Emitting Diode.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH7949
REV NO: V.1
DATE: SEP/29/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.M.Wu
PAGE: 1 OF 5
ERP: 1203007281
Selection Guide
Part No.
Dice
APTL3216EC
Lens Type
High Efficiency Red (GaAsP/GaP)
WATER CLEAR
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2θ1/2
10
25
70°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
nm
IF=20mA
High Efficiency Red
625
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH7949
REV NO: V.1
DATE: SEP/29/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.M.Wu
PAGE: 2 OF 5
ERP: 1203007281
High Efficiency Red
APTL3216EC
SPEC NO: DSAH7949
REV NO: V.1
DATE: SEP/29/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.M.Wu
PAGE: 3 OF 5
ERP: 1203007281
APTL3216EC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH7949
REV NO: V.1
DATE: SEP/29/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.M.Wu
PAGE: 4 OF 5
ERP: 1203007281
PACKING & LABEL SPECIFICATIONS
APTL3216EC
SPEC NO: DSAH7949
REV NO: V.1
DATE: SEP/29/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: S.M.Wu
PAGE: 5 OF 5
ERP: 1203007281