Kingbright ® 2.0x1.2mm SMD CHIP LED LAMPS Features KP-2012SYC SUPER BRIGHT YELLOW !2.0mmx1.2mm !LOW SMT LED, 1.1mm THICKNESS. KP-2012SYCK SUPER BRIGHT YELLOW POWER CONSUMPTION. !WIDE !IDEAL VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. !VARIOUS Package Dimensions COLORS AND LENS TYPES AVAILABLE. Description The Super Bright Yellow source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Par t No . Di c e L en s Ty p e Iv (mc d ) @ 20 mA View in g An g l e Min . Ty p . 2θ1/2 KP-2012SYC SUPER BRIGHT YELLOW (InGaAlP) WATER CLEAR 40 60 120° KP-2012SYCK SUPER BRIGHT YELLOW (InGaAlP) WATER CLEAR 30 50 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. KP-2012SY-1 Kingbright ® Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter Dev ic e λpeak Peak Wavelength Super Bright Yellow ∆λ1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 590 nm IF=20mA Super Bright Yellow 20 nm IF=20mA Capacitance Super Bright Yellow 33 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.4 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par ameter Su p er B r ig h t Yello w Un i t s Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. KP-2012SY-2 Kingbright ® Super Bright Yellow KP-2012SYC,KP-2012SYCK KP-2012SY SERIES SMT Reflow Soldering Instructions KP-2012SY-3 Kingbright ® KP-2012SY SERIES Recommended Soldering Pattern (Units : mm) KP-2012SY SERIES Tape Specifications (Units : mm) KP-2012SY-4