3.2mm x 1.6mm FULL-COLOR SURFACE MOUNT LED LAMP ATTENTION KPTF-3216PBVGSURKC OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES BLUE GREEN HYPER RED PRELIMINARY SPEC Features Description 3.2mmx1.6mm SMT LED, 0.75mm THICKNESS. The Blue source color devices are made with InGaN on SiC LOW POWER CONSUMPTION. Light Emitting Diode. ONE BLUE, ONE GREEN AND ONE RED CHIPS IN The Green source color devices are made with InGaN on ONE PACKAGE. SiC Light Emitting Diode. CAN PRODUCE ANY COLOR IN VISIBLE The Hyper Red source color devices are made with DH SPECTRUM, INCLUDING WHITE LIGHT. InGaAlP on GaAs substrate Light Emitting Diode. PACKAGE : 2000PCS / REEL. Static electricity and surge damage the LEDS. RoHS COMPLIANT It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type BLUE (InGaN) KPTF-3216PBVGSURKC GREEN (InGaN) WATER CLEAR HYPER RED (InGaAIP) Viewing Angle Min. Typ. 50 100 70 150 70 150 2θ θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Green Hyper Red λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 520 650 nm IF=20mA Blue Green Hyper Red 470 525 635 nm IF=20mA Spectral Line Half-width Blue Green Hyper Red 25 38 28 nm IF=20mA C Capacitance Blue Green Hyper Red 65 45 35 pF VF=0V;f=1MHz VF Forward Voltage Blue Green Hyper Red 3.65 3.5 1.95 4.2 4.5 2.5 V IF=20mA IR Reverse Current Blue Green Hyper Red 10 10 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Blue Green Hyper Red Units Power dissipation 102 105 170 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 160 150 185 mA Reverse Voltage 5 V -40°C TO +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 KPTF-3216PBVGSURKC Blue SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 Green SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 Hyper Red SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 KPTF-3216PBVGSURKC RecommendedSoldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0242 REV NO: V.5 DATE: OCT/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6