T-1(3mm) BI-COLOR INDICATOR LAMP L-93WEGW HIGH EFFICIENCY RED / GREEN Features z UNIFORM z LOW LIGHT OUTPUT. The High Efficiency Red source color devices are made with POWER CONSUMPTION. z MILKY z3 Description Gallium Arsenide Phosphide on Gallium Phosphide Orange WHITE DIFFUSION LENS. LEADS WITH ONE COMMON LEAD. z THIRD z I.C. COLOR (MIXED COLOR) AVAILABLE. Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. COMPATIBLE. z LONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. L-93WEGW-V.1#1 FEB/21/2001 Selection Guide Part No. Dice Iv (mcd) @ 20 mA Lens Type Min. Typ. 20 50 20 40 HIGH EFFICIENCY RED (GaAsP/GaP) L-93WEGW Viewing Angle WHITE DIFFUSED 2θ1/2 60° GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter Dev ic e λpeak Peak Wavelength High Efficiency Red Green ∆λ1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 625 565 nm IF=20mA High Efficiency Red Green 45 30 nm IF=20mA Capacitance High Efficiency Red Green 12 45 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par ameter Hig h Effic ien c y Red Gr een Un i t s Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 150 150 mA 5 5 V Reverse Voltage -40°C To +85°C Operation/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. L-93WEGW-V.1#2 FEB/21/2001 High Efficiency Red / Green L-93WEGW L-93WEGW-V.1#3 FEB/21/2001