KINGBRIGHT SA08

20.32mm (0.8INCH) SINGLE DIGIT
NUMERIC DISPLAY
Part Number: SA08-13SRWA
Features
z0.8
Description
INCH DIGIT HEIGHT.
zLOW
zEXCELLENT
zI.C.
The Super Bright Red source color devices are made with
CURRENT OPERATION.
zEASY
SUPER BRIGHT RED
Gallium Aluminum Arsenide Red Light Emitting Diode.
CHARACTER APPEARANCE.
MOUNTING ON P.C. BOARDS OR SOCKETS.
COMPATIBLE.
zCATEGORIZED
FOR LUMINOUS INTENSITY.
zMECHANICALLY
zSTANDARD
zRoHS
RUGGED.
: GRAY FACE, WHITE SEGMENT.
COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAD2286
REV NO: V.7
DATE: NOV/01/2006
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.L.LI
ERP: 1301000128
Selection Guide
Dice
Part No.
SA08-13SRWA
Iv (ucd) [1]
@ 10mA
Lens Type
SUPER BRIGHT RED (GaAIAs)
WHITE DIFFUSED
Min.
Typ.
4700
24000
Description
Common Anode, Rt.& Lt.
Hand Decimal.
Note:
1.Luminous Intensity/ Luminous Flux: +/-15%
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAD2286
REV NO: V.7
DATE: NOV/01/2006
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.L.LI
ERP: 1301000128
Super Bright Red
SA08-13SRWA
SPEC NO: DSAD2286
REV NO: V.7
DATE: NOV/01/2006
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.L.LI
ERP: 1301000128
PACKING & LABEL SPECIFICATIONS
SA08-13SRWA
SPEC NO: DSAD2286
REV NO: V.7
DATE: NOV/01/2006
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.L.LI
ERP: 1301000128