KINGBRIGHT WP1004ID

1.1x3.4mm RECTANGULAR SOLID LAMP
Part Number: WP1004ID
High Efficiency Red
Features
Description
z LOW POWER CONSUMPTION.
The High Efficiency Red source color devices are made with
z RELIABLE AND RUGGED.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
z EXCELLENT UNIFORMITY OF LIGHT OUTPUT.
Light Emitting Diode.
z SUITABLE FOR LEVEL INDICATOR.
z LONG LIFE-SOLID STATE RELIABILITY.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAH7511
REV NO: V.1
DATE: SEP/10/2007
PAGE: 1 OF 4
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: R.Chen
ERP: 1101000302
Selection Guide
Part No.
Dice
WP1004ID
Lens Type
High Efficiency Red (GaAsP/GaP)
RED DIFFUSED
Viewing
Angle [1]
Iv (mcd) [2]
@ 10mA
Min.
Typ.
2θ1/2
5
12
100°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
nm
IF=20mA
High Efficiency Red
625
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAH7511
REV NO: V.1
DATE: SEP/10/2007
PAGE: 2 OF 4
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: R.Chen
ERP: 1101000302
High Efficiency Red
WP1004ID
SPEC NO: DSAH7511
REV NO: V.1
DATE: SEP/10/2007
PAGE: 3 OF 4
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: R.Chen
ERP: 1101000302
PACKING & LABEL SPECIFICATIONS
WP1004ID
SPEC NO: DSAH7511
REV NO: V.1
DATE: SEP/10/2007
PAGE: 4 OF 4
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: R.Chen
ERP: 1101000302