KINGBRIGHT WP1053YDT

1mmx5mm RECTANGULAR SOLID LAMP
WP1053YDT
YELLOW
Description
Features
LOW POWER CONSUMPTION.
The Yellow source color devices are made with Gallium
RELIABLE AND RUGGED.
Arsenide Phosphide on Gallium Phosphide Yellow Light
EXCELLENT UNIFORMITY OF LIGHT OUTPUT.
Emitting Diode.
SUITABLE FOR LEVEL INDICATOR.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF2554
REV NO: V.1
DATE: APR/16/2005
PAGE: 1 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000480
Selection Guide
Part No.
Dice
WP1053YDT
Iv (mcd)
@ 10mA
Lens Type
YELLOW (GaAsP/GaP)
YELLOW DIFFUSED
Viewing
Angle
Min.
Typ.
2 θ 1/2
1.8
5
110°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD
Dominant Wavelength
∆λ1/2
C
Typ.
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR= 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF2554
REV NO: V.1
DATE: APR/16/2005
PAGE: 2 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000480
Yellow
WP1053YDT
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF2554
REV NO: V.1
DATE: APR/16/2005
PAGE: 3 OF 3
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.W.WANG
ERP:1101000480