KINGBRIGHT WP130WCP-2EYW

T-1 (3mm) BI-LEVEL LED INDICATOR
Part Number: WP130WCP/2EYW
High Efficiency Red
Yellow
Features
Description
z BI-LEVEL RIGHT ANGLE HOUSING LED.
The High Efficiency Red source color devices are made with
z PRE-TRIMMED LEADS FOR PC BOARD MOUNTING.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
z I.C. COMPATIBLE.
Light Emitting Diode.
z BLACK CASE ENHANCES CONTRAST RATIO.
The Yellow source color devices are made with Gallium
z HIGH RELIABILITY.
Arsenide Phosphide on Gallium Phosphide Yellow Light
z UL RATING: 94V-0.
Emitting Diode.
z HOUSING MATERIAL: TYPE 66 NYLON.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAF1891
REV NO: V.2
DATE: MAY/21/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1102000163
Selection Guide
Part No.
Dice
Lens Type
High Efficiency Red (GaAsP/GaP)
WP130WCP/2EYW
Iv (mcd) [2]
@ 20mA
Min.
Typ.
7
30
7
20
WHITE DIFFUSED
Yellow (GaAsP/GaP)
Viewing
Angle [1]
2θ1/2
60°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
590
nm
IF=20mA
High Efficiency Red
Yellow
625
588
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
Yellow
45
35
nm
IF=20mA
C
Capacitance
High Efficiency Red
Yellow
15
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
Yellow
2
2.1
2.5
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
Yellow
10
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Yellow
Units
Power dissipation
75
75
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
160
140
mA
Reverse Voltage
5
Operating / Storage Temperature
V
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAF1891
REV NO: V.2
DATE: MAY/21/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1102000163
WP130WCP/2EYW
High Efficiency Red
SPEC NO: DSAF1891
REV NO: V.2
DATE: MAY/21/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1102000163
Yellow
SPEC NO: DSAF1891
REV NO: V.2
DATE: MAY/21/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1102000163
PACKING & LABEL SPECIFICATIONS
WP130WCP/2EYW
SPEC NO: DSAF1891
REV NO: V.2
DATE: MAY/21/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1102000163