T-1 3/4 (5mm) RIGHT ANGLE LED INDICATOR PRELIMINARY SPEC Part Number: WP1504CB/RWC/Z WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Features Static electricity and surge damage the LEDS. zLOW POWER CONSUMPTION. It is recommended to use a wrist band or anti-electrostatic zVERSATILE MOUNTING ON P.C. BOARD OR PANEL. zT-1 3/4 DIAMETER FLANGELESS PACKAGE. zRELIABLE AND RUGGED. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. zUL RATING : 94V-0. zHOUSING MATERIAL: TYPE 66 NYLON. z MOISTURE SENSITIVITY LEVEL : LEVEL 1. z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. zTYP. COLOR TEMPERATURE:6500K. zCOLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). zOPTICAL EFFICIENCY: 32.8 lm/W(TYP.) z COLOR REPRODUCTION INDEX:80. z RoHS COMPLIANT. Applications z Furniture lighting z Outdoor displays z Optical indicators z Signal and symbol luminaire z Marker lights (e.g. steps, exit ways, etc.) z Lighting for special effects (e.g. starry sky) z Substitute for miniature flashlight Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 Selection Guide Note2 Dice Part No. WP1504CB/RWC/Z WHITE (InGaN) luminous Intensity Iv(mcd) @ 20mA Lens Type WATER CLEAR Note3 Φv (mlm) @ 20mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 2800 7500 2100 20° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA 350 °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 3.7 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 μA Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.02 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20mA Φv (mlm) @ 20mA Code. Min. Max. Typ. ZA 2800 3800 900 ZB 3300 4500 1100 ZC 3800 5500 1300 ZD 4700 6500 1600 ZE 5700 7500 1900 ZF 6700 8500 2200 ZG 7500 10000 2500 ZH 8000 12000 2800 ZM 10000 16000 3200 ZN 12000 20000 3700 ZP 16000 24000 4300 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP1504CB/RWC/Z SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 White WP1504CB/RWC/Z SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 WP1504CB/RWC/Z White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 b4 0.35 c0 0.34 0.33 b3 b1 0.32 0.31 b2 0.30 a1 0.29 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 7600~5600k Reference CCT: 6000~4600k SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 T-1 3/4 (5mm) RIGHT ANGLE LED INDICATOR WP1504CB/RWC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848 PACKING & LABEL SPECIFICATIONS WP1504CB/RWC/Z SPEC NO: DSAH7947 REV NO: V.1 DATE: SEP/29/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.WANG ERP: 1102009848