T-1 3/4 (5mm) SOLID STATE LAMP WP1513EC Features z LOW Description POWER CONSUMPTION. z VERSATILE z T-1 The High Efficiency Red source color devices are made MOUNTING ON P.C. BOARD OR PANEL. 3/4 DIAMETER PACKAGE, TAPERED TYPE. z RELIABLE z RoHS HIGH EFFICIENCY RED with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. AND RUGGED. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE9100 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 EPR:1101001741 Selection Guide Part No. Dice WP1513EC Iv (mcd) @ 10mA Lens Type HIGH EFFICIENCY RED(GaAsP/GaP) Viewing Angle Min. Typ. 2 θ 1/2 40 80 20° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE9100 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 EPR:1101001741 High Efficiency Red SPEC NO: DSAE9100 APPROVED: J. Lu WP1513EC REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 EPR:1101001741 PACKING & LABEL SPECIFICATIONS WP1513EC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE9100 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: APR/19/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 EPR:1101001741