T-1 (3mm) BI-LEVEL LED INDICATOR PÂNͳWP7104ALUP/2GD-0L GREEN Features zI.C. COMPATIBLE. Description zBLACK CASE ENHANCES CONTRAST RATIO. The Orange source color devices are made with Gallium zWIDE VIEWING ANGLE. Arsenide Phosphide on Gallium Phosphide Orange Light zHOUSING MATERIAL: PPA. The Green source color devices are made with Gallium zHIGH RELIABILITY LIFE MEASURED IN YEARS. Emitting Diode. zRoHS COMPLIANT. Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 Selection Guide Part No. Dice WP7104ALUP/2GD-0L Iv (mcd) [2] @ 10mA Lens Type GREEN (GaP) Viewing Angle [1] Min. Typ. 2 θ1/2 8 20 40° GREEN DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 WP7104ALUP/2GD-0L Green SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 WP7104ALUP/2GD-0L Tape Specifications (Units : mm) Note: Tolerance is ±0.25 unless otherwise noted. SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 PACKING & LABEL SPECIFICATIONS WP7104ALUP/2GD-0L SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801