KINGBRIGHT WP7104ALUP-2SRD-0L

T-1 (3mm) BI-LEVEL LED INDICATOR
Part Number: WP7104ALUP/2SRD-0L
Super Bright Red
Features
Description
z I.C. COMPATIBLE.
The Super Bright Red source color devices are made with
z BLACK CASE ENHANCES CONTRAST RATIO.
Gallium Aluminum Arsenide Red Light Emitting Diode.
z WIDE VIEWING ANGLE.
z HIGH RELIABILITY LIFE MEASURED IN YEARS.
z HOUSING MATERIAL: PPA.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAH3815
REV NO: V.1
DATE: MAY/09/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1102009883
Selection Guide
Part No.
Dice
WP7104ALUP/2SRD-0L
Lens Type
Super Bright Red (GaAlAs)
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
110
300
40°
RED DIFFUSED
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3815
REV NO: V.1
DATE: MAY/09/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1102009883
Super Bright Red
WP7104ALUP/2SRD-0L
SPEC NO: DSAH3815
REV NO: V.1
DATE: MAY/09/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1102009883
WP7104ALUP/2SRD-0L
Tape Specifications
(Units : mm)
SPEC NO: DSAH3815
REV NO: V.1
DATE: MAY/09/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1102009883
PACKING & LABEL SPECIFICATIONS
WP7104ALUP/2SRD-0L
SPEC NO: DSAH3815
REV NO: V.1
DATE: MAY/09/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1102009883