T-1 3/4 (5mm) HOUSING FOR LED LAMP PRELIMINARY SPEC Part Number: WP7113WYP/PBC/Z BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zOUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with InGaN Light zRELIABLE AND RUGGED. Emitting Diode. zIC COMPATIBLE/LOW CURRENT CAPABILITY. Static electricity and surge damage the LEDS. zHOUSING MATERIAL: PPA. It is recommended to use a wrist band or anti-electrostatic zPACKAGE : 65 PCS/TUBE. glove when handling the LEDs. zHIGH TEMPERATURE RESISTANT HOUSING. All devices, equipment and machinery must be electrically zRoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAH0992 REV NO: V.3 DATE: MAY/17/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009947 Selection Guide Dice Part No. WP7113WYP/PBC/Z Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 2800 5500 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 458 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 22 nm IF=20mA C Capacitance Blue 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 3.7 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH0992 REV NO: V.3 DATE: MAY/17/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009947 Blue WP7113WYP/PBC/Z SPEC NO: DSAH0992 REV NO: V.3 DATE: MAY/17/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009947 WP7113WYP/PBC/Z IC Tube Dimensions Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAH0992 REV NO: V.3 DATE: MAY/17/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009947 PACKING & LABEL SPECIFICATIONS WP7113WYP/PBC/Z SPEC NO: DSAH0992 REV NO: V.3 DATE: MAY/17/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009947