7.6mm x 7.6mm SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP76761CSYC/J SUPER BRIGHT YELLOW Features Description SUPER FLUX OUTPUT. The Super Bright device is based on a light emitting diode DESIGN FOR HIGH CURRENT OPERATION. chip made from AlGaInP and bonded on silicon substrate. OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG1669 REV NO: V.2 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/16/2006 DRAWN: Y.L.LI PAGE: 1 OF 4 ERP:1101018013 Selection Guide Dice Part No. WP76761CSYC/J Iv (mcd) [2] @ 20mA *70mA Lens Type Viewing Angle [1] 2θ1/2 Min. Typ. 2200 4500 *7500 *16000 SUPER BRIGHT YELLOW (AlGaInP) WATER CLEAR 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width; Luminous intensity / luminous flux: +/-15%. 3.Drive current between 10mA and 30mA are recommended for long term performance. 4.Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 589 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.3 2.8 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 84 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG1669 REV NO: V.2 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/16/2006 DRAWN: Y.L.LI PAGE: 2 OF 4 ERP:1101018013 Super Bright Yellow WP76761CSYC/J SPEC NO: DSAG1669 REV NO: V.2 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/16/2006 DRAWN: Y.L.LI PAGE: 3 OF 4 ERP:1101018013 PACKING & LABEL SPECIFICATIONS WP76761CSYC/J WP76761Cxxx SPEC NO: DSAG1669 REV NO: V.2 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/16/2006 DRAWN: Y.L.LI PAGE: 4 OF 4 ERP:1101018013