SnapLED PRELIMINARY SPEC P/N: WP7700C4SEC/J Technical Data Features ½³HIGH LUMINANCE OUTPUT. ½³DESIGN FOR HIGH CURRENT OPERATION. ½³SOLDERLESS MOUNTING TECHNIQUE. ½³LOW POWER CONSUMPTION. ½³LOW THERMAL RESISTANCE. ½³LOW PROFILE. Benefits *Rugged Lighting Products. *Electricity savings. *Maintenance savings. ½³PACKAGED IN TUBES FOR USE WITH *Environmental Conformance. AUTOMATIC INSERTION EQUIPMENT. ½³RoHS COMPLIANT. Typical Applications *Automotive Exterior Lighting. *Solid State Lighting and Signaling. SPEC NO: DSAG3764 REV NO: V.1 DATE: APR/12/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Z.Z.YANG ERP: 1101016797 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER SE-J UNITS DC Forward Current 70 mA Power dissipation 217 mW Reverse Voltage 5 V Operating Temperature -40 To +85 Storage Temperature -55 To +85 C C C C SPEC NO: DSAG3764 REV NO: V.1 DATE: APR/12/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Z.Z.YANG ERP: 1101016797 Selection Guide Part No. Iv(cd)[1] @70mA Min. Typ. Viewing Angle[2] 21/2 Typ. 7.5 18 30° LED COLOR WP7700C4SEC/J TS InGaAlP ORANGE Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous intensity / luminous flux: +/-15%. 2.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=70mA Rj-a=200°C/W DEVICE TYPE SE-J PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH ∆λ1/2(nm) TYP. 640 630 25 NOTE: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the deviceÁ Electrical Characteristics at TA=25°C FORWARD VOLTAGE[1] VF»VOLTS) DEVICE @ IF=70mA TYPE SE-J REVERSE CURRENT IR (uA) @ VR=5V CAPACITANCE C (pF) @ VF=0V F=1MHZ THERMAL RESISTANCE Rj-pin °C/W MIN. TYP. MAX. MAX. TYP. TYP. 2.6 2.8 3.1 10 27 125 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAG3764 REV NO: V.1 DATE: APR/12/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Z.Z.YANG ERP: 1101016797 Figures SPEC NO: DSAG3764 REV NO: V.1 DATE: APR/12/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Z.Z.YANG ERP: 1101016797 PACKING & LABEL SPECIFICATIONS WP7700C4SEC/J SPEC NO: DSAG3764 REV NO: V.1 DATE: APR/12/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Z.Z.YANG ERP: 1101016797