2x3mm RECTANGULAR SOLID LAMP WP914AT Features AMBER Description LOW POWER CONSUMPTION. The Amber source color devices are made with Gallium ULTRA BRIGHTNESS IS AVAILABLE. RELIABLE AND RUGGED. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. EXCELLENT UNIFORMITY OF LIGHT OUTPUT. SUITABLE FOR LEVEL INDICATOR. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2576 REV NO: V.1 DATE: APR/20/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011838 Selection Guide Part No. Dice WP914AT Iv (mcd) @ 10 mA Lens Type AMBER (GaAsP/GaP) AMBER TRANSPARENT Viewing Angle Min. Typ. 2 θ 1/2 1.8 7 90° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Amber 590 nm IF=20mA λD Dominant Wavelength Amber 588 nm IF=20mA ∆λ1/2 Spectral Line Half-width Amber 35 nm IF=20mA C Capacitance Amber 20 pF VF=0V;f=1MHz VF Forward Voltage Amber 2.1 2.5 V IF=20mA IR Reverse Current Amber 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Amber Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2576 REV NO: V.1 DATE: APR/20/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011838 Amber WP914AT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2576 REV NO: V.1 DATE: APR/20/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011838 PACKING & LABEL SPECIFICATIONS WP914AT SPEC NO: DSAF2576 REV NO: V.1 DATE: APR/20/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011838