T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP93A8EWP/IDTG0L HIGH EFFICIENCY RED Description Features z I.C. COMPATIBLE. The High Efficiency Red source color devices are made with z BLACK CASE ENHANCES CONTRAST RATIO. Gallium Arsenide Phosphide on Gallium Phosphide Orange z WIDE VIEWING ANGLE. Light Emitting Diode. z HIGH RELIABILITY LIFE MEASURED IN YEARS. z HOUSING MATERIAL: PPA z PACKAGE : 500PCS / REEL. z HIGH TEMPERATURE RESISTANT HOUSING. z HIGH GLASS TRANSITION TEMPERATURE EPOXY. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1851 REV NO: V.4 DATE: SEP/20/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004088 Selection Guide Dice Part No. WP93A8EWP/IDTG0L Iv (mcd) [2] @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED Viewing Angle [1] Min. Typ. 2 θ 1/2 12 25 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1851 REV NO: V.4 DATE: SEP/20/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004088 High Efficiency Red WP93A8EWP/IDTG0L SPEC NO: DSAF1851 REV NO: V.4 DATE: SEP/20/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004088 WP93A8EWP/IDTG0L Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1851 REV NO: V.4 DATE: SEP/20/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004088 PACKING & LABEL SPECIFICATIONS WP93A8EWP/IDTG0L SPEC NO: DSAF1851 REV NO: V.4 DATE: SEP/20/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102004088