MF-SERIES 䡵 Features (1) Wide band: High attenuation. Band wide: 150kHz ~ 30MHz, 2 stage filter (2) Fast-on Terminals (3) Compact, thin type package Low profile metal case 10A type: 26mm 䡵 Safety standard UL1283, CSA Std. C22. 2 No. 8 (C-UL) VDE0565 Teil. 3 5653 EN133200 EN133200 (VDE0565 will expire on July 23, 2003.) MF1216 MF1210 MF1206 䡵 Specifications Item Model MF1206 (Note) 6A MF1210 1 Rated voltage (AC, DC) 2 Rated current (AC, DC) 3 Test voltage (terminal to case, AC 1 minute) 2500V (20mA) at 25°C, 70% RH 4 Isolation resistance (terminal to case, 500VDC) 100MΩ min. at 25°C, 70% RH 5 Leakage current 250V 10A Noise Filter DC resistance 7 Temperature rise 8 Operating temperature 9 Operating humidity 10 Storage temperature 11 Storage humidity 12 Vibration 13 Safety standard 14 Weight 16A 0.5mA max. 125V, 60Hz 1mA max. 250V, 60Hz 6 MF1216 140mΩ max. 50mΩ max. 34mΩ max. 40°C max. –25 ~ +85°C 30% ~ 95% RH (No dewdrop) –40 ~ +85°C 10% ~ 95% RH (No dewdrop) Sweep: 10 ~ 55 ~ 10 Hz (for one minute), Amplitude: 1,5 mm X, Y and Z axes for 2 hours Approved by UL1283, CSA C22.2 No. 8 (C-UL), VDE0565 Teil 3 and EN133200 (VDE). (typ) 190g 220g 310g (Note) : Value at Ta < = 35°C. Refer to the derating curve shown below at Ta > 35°C. 䡵 Circuit 䡵 Derating 䢇 Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. 䢇 Contact us about delivery before ordering. 156 MF-SERIES 䡵 MF1206 Case: Metal (Unit: mm) 䡵 MF1210 Noise Filter Case: Metal (Unit: mm) 䡵 MF1216 Case: Metal (Unit: mm) 157 MF-SERIES CHARACTERISTICS 䡵 Typical Insertion Loss (2) Symmetrical (1) Asymmetrical Attenuation (dB) MF1206 Attenuation (dB) MF1206 Frequency (MHz) Frequency (MHz) Frequency (MHz) MF1216 Attenuation (dB) MF1216 Attenuation (dB) Noise Filter Attenuation (dB) MF1210 Attenuation (dB) MF1210 Frequency (MHz) Frequency (MHz) 158 Frequency (MHz)