KW1-3001XY SERIES Multi-Color LED Numeric Display Single Digit (3.00") DESCRIPTION: PACKAGE DIMENSIONS The KW1-3001XY series is large multi-color single digit display in 3.00 inch (76.00mm) height with right comma designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. 46.00(1.811) φ0.80 76.0(3.0) 80.0(3.15) 6.0(0.234) o 110.0(4331) 10 + PIN 1. o F Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC 6.0(0.236) min. C DP D INTERNAL CIRCUIT DIAGRAM COMMA C D E F G GREEN B ORANGE A GREEN 16 15 ORANGE Unit V nm nm µA µ cd E 22.86(0.90) DP 14 13 12 11 10 9 4 3 2 1 20 19 18 17 8 7 6 5 COMMA TESTING CONDITION FOR EACH PARAMETER : Symbol Vf λρ ∆λ Ir Iv B G 13.0(0.512) NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity A 70.0(2.756) ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) 16 15 Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A B C D E F G DP 14 13 12 11 10 9 4 3 2 1 20 19 18 17 8 7 6 5 COMMA o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. KW1-3001A32 KW1-3001ASG KW1-3001A26 KW1-3001C32 KW1-3001CSG KW1-3001C26 Wave C.C or C.A Absolute Maximum Ratings Electro-optical Data(at 10mA) ∆λ Pd If 635 45 100 50 100 10.5 11.5 15.0 10-20 4000 9000 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 Common 660 20 100 50 100 10.0 11.0 14.0 10-20 14000 50000 Anode 570 30 100 50 100 11.0 12.0 15.0 10-20 4000 8500 Yellow 585 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 GaP Green 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 10.5 11.5 15.0 10-20 4000 9000 GaP Green 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 GaAlAs Super Red Common 660 20 100 50 100 10.0 11.0 14.0 10-20 14000 50000 GaP Super Green Cathode 570 30 100 50 100 11.0 12.0 15.0 10-20 4000 8500 GaAsP/GaP Yellow 585 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 GaP Green 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 Raw Material Emitted Color GaAsP/GaP Hi-Eff Red GaP Green GaAlAs Super Red GaP Super Green GaAsP/GaP Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).