KSK-1A46-... MEDER electronic CHARACTERISTICS DIMENSIONS All dimensions in mm [inches] • Glass length of 12 mm and diameter of 2.0 mm • Normally open 1 Form A contact • Excellent for low level applications Switch Model → Contact Form → All Data at 20 oC Contact Ratings Conditions CONTACT DATA KSK-1A46-... Form A Max. Units Switching Power* Any DC combination of V and A not to exceed their individual max.’s Min. Typ. 10 W Switching Voltage DC or peak AC 200 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.0 A Static Contact Resistance at 0.5 V & 10 mA 150 mΩ Dynamic Contact Resistance measured w/ 0.5 V & 50 mA, 1.5 ms after closure 200 mΩ Insulation Resistance cross Contacts 100 Volts applied 1012 Breakdown Voltage > 60 sec. 225 Release Time incl. Bounce 100 % overdrive Release Time measured with/ no coil suppression Capacitance at 10 kHz across contact Ω VDC 0.7 ms 0.1 ms 0.2 Test Coil ** pF KMS-01 Standard AT range 10 40 AT g Environmental Data Shock Resistance 1/2 sine wave for 11 ms 50 Vibration Resistance 10 - 2000 Hz 20 Ambient Temperature max. 10 C / minute allowance -20 Stock Temperature max. 10 oC / minute allowance -55 Soldering Temperature 5 sec. dwell o g 130 o C 130 o C 260 o C Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy see our test section on Page 112. ** See our test section on Page 116. ORDER INFORMATION Part Number Example - KSK - 1A46 - 1015 1015 is the AT range (Any AT can be ordered between 10 & 40 in a minimum range of 2 AT) Series Contact Form Switch Model KSK - 1A 46 - Options www.meder.com 96 At Range (between) xxxx 10 -40