MIMIX PB-CGB8001-SC-00B0

DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Features
Functional Block Diagram (SOT-89)
18 dBm Linear Power @ 2140 MHz
15.5 dB Gain @ 2140 MHz
12 dB Gain @ 2700 MHz
27 dBm P1dB @ 2140 MHz
Low Performance Variation Over Temperature
Low Cost: SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >2000V HBM
Low Thermal Resistance: <35ºC/Watt
Low Volt Supply: 5V, Active Bias
Ground
4
1
Input
2
3
Ground Output
Bias
Absolute Maximum Ratings
Description
The CGB8001-SC is a single stage, high power, high dynamic range,
utility gain block amplifier. Designed for applications operating
within the DC to 2.7 GHz frequency range, Mimix’s broadband,
cascadable, gain block amplifier is an ideal solution for transmit,
receive and IF applications. This MMIC amplifier is available in an
industry standard, RoHS compliant, SOT-89 package. Mimix's InGaP
HBT technology and an industry low thermal resistance offers a
thermally robust and reliable gain block solution. The InGaP HBT die
have extra pads to enable thorough DC testing. This unique test
capability and the inclusion of ESD protection on all die, significantly
enhances the quality, reliability and ruggedness of these products.
This gain block amplifier offers significant ease of use in a broad
range of applications. The combination of high gain, P1dB and high
linear power at low current makes the CGB8001-SC an ideal transmit
and receive solution when used in applications including 3G, fixed
wireless broadband, WLAN and WiMAX services operating from 2.1 to
2.7 GHz. The CGB8001-SC has a an on-chip integrated active bias
circuit providing stable current over bias and temperature variations.
The device is biased with a single +5V supply in a class AB mode
making it efficient at back-off input power levels.
Max Device Voltage
Max Device Current
Max Device Dissipated Power
RF Input Power
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
ESD (HBM)
+6.0 V
400 mA
1.2 W
+17 dBm
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
35º C/W
2000 V
Operation of this device above any of these parameters may cause
permanent damage.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
UMTS, 3G, WLAN, WiMAX
Wireless Broadband, Fixed Wireless, SATCOM
Transmit and Receive Functions
CATV
Typical Performance: (5V, 25C)
Parameter
Frequency
Small Signal Gain
Output Power at 1dB Compression
Noise Figure
Pout @ ACPR = -45dBc*
Symbol
F
S21
P1dB
NF
Pout
Unit
GHz 900 1960 2140 2450 2750
dB 20.5 16.2 15.5 13.5 12
dBm 27.6 27
27 26.5 25.2
dB
3.6
3.7
3.9
4.3
5.5
dBm 21
21
18
16
16
*IS-95, 9 forward channels @ 900 & 1950 MHz, WCDMA, TM-1, 64 DPCH @ 2140, 2450 & 2750 MHz
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Evaluation Board Layout
Component Values
Component
850-950 MHz
1800-2200 MHz
Designator
(A)
(R)
2400-2800 MHz
Vendor, Size
(C)
C1
short
2.2 pF*
27 pF
C2
100 pF
short
short
KOA 0603 NPO
KOA 0603 NPO
C3
100 pF
100 pF
100 pF
KOA 0603 NPO
C4
1000 pF
1000 pF
1000 pF
KOA 0603 NPO
C5
1 uF
1 uF
1 uF
KOA 0805 X7R
C6
3.9 pF
1 pF
1 pF
KOA 0603 NPO
C7
5.5 pF
DNP
DNP
KOA 0603 NPO
L2
39 nH
27 nH
22 nH
Murata 0603 chip
TL1
6 mm, 50 ohms
N/A
N/A
N/A
TL2
3 mm, 50 ohms
3 mm, 50 ohms
3 mm, 50 ohms
N/A
TL3
1.5 mm, 50 ohms
1.5 mm, 50 ohms
1.5 mm, 50 ohms
N/A
TL4
3.5 mm, 50 ohms
3.5 mm, 50 ohms
3.5 mm, 50 ohms
N/A
* 1800-2200 MHz linearity can be improved by movi ng C1 3 mm further away from the CGB8001-SC
Vcc = 5 V
Recommended Schematic
C5
CGB8001-SC
C2
C4
C1
C3
RFin
TL1
C7
L2
TL2
TL3
RFout
TL4
C6
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Typical S-Parameter and Noise Performance: 900 MHz
5V, 100mA, App CKT @ 900MHz
25
S11
20
900MHz
-40
25
85
Unit
Gain
20.3
20.5
20.1
dB
P1dB
28.0
27.6
26.1
dBm
NF
3.1
3.7
4.4
S21
S22
15
10
dB
5
0
-5
dB
-10
-15
-20
-25
0
0.25
0.5
0.75
1
1.25 1.5 1.75
Frequency (GHz)
2
2.25
2.5
2.75
5V, 100mA, App CKT @ 900MHz
25
20
15
10
S11
S21
S22
dB
5
0
-5
-10
-15
-20
-25
0.7
0.75
0.8
0.85
0.9
0.95
Frequency (GHz)
1
1.05
1.1
ACPR
Vd = 5V, Iq = 100mA, 900MHz
Current Vs Ouput Power
Vd = 5V, Iq = 100mA, 900MHz, Is-95A
IS-95A Downlink, 9 Channels Forward
180
-35
160
150
140
25degC
130
-40degC
120
85degC
ACPR (dBc)
Current (mA)
170
-40
-45
25degC
-50
-40degC
85degC
-55
110
100
-60
90
-65
80
10
10
12
14
16
18
Ouput Power (dBm)
20
12
14
16
18
20
22
22
Ouput Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
3
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Typical S-Parameter and Noise Performance: 1.96 GHz
5V, 100mA, App CKT @ 1900MHz
25
S11
S21
S22
20
1.96GHz
-40
25
85
Unit
Gain
16.4
16.2
15.9
dB
P1dB
27.8
27.2
26.8
dBm
NF
3.1
3.7
4.3
dB
15
10
dB
5
0
-5
-10
-15
-20
-25
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
5V, 100mA, App CKT @ 1900MHz
25
20
15
10
S11
S21
S22
dB
5
0
-5
-10
-15
-20
-25
1.7
1.75
1.8
1.85
1.9
1.95
2
2.05
Frequency (GHz)
2.1
2.15
2.2
Current Vs Output Power
Vd = 5V, Iq = 100mA, 1960MHz
IS-95A Downlink, 9 Channels Forward
ACPR
Vd = 5V, Iq = 100mA, 1960MHz
IS-95A Downlink, 9 Channels Forward
-30
180
170
150
140
25degC
130
-40degC
120
85degC
110
ACPR (dBc)
Current (mA)
-35
160
-40
25degC
-45
-40degC
-50
85degC
-55
100
-60
90
80
-65
10
11
12
13
14
15
16
17
18
19
Output Power (dBm)
20
21
22
23
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Output Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Typical S-Parameter and Noise Performance: 2.14 GHz
5V, 100mA, App CKT @ 1900MHz
25
S11
S21
S22
20
2.14GHz
-40
25
85
Unit
Gain
15.8
15.5
14.9
dB
P1dB
28.2
27.0
26.7
dBm
NF
3.3
3.9
4.7
dB
15
10
dB
5
0
-5
-10
-15
-20
-25
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
5V, 100mA, App CKT @ 1900MHz
25
20
15
10
S11
S21
S22
dB
5
0
-5
-10
-15
-20
-25
1.7
1.75
1.8
1.85
1.9
1.95
2
2.05
Frequency (GHz)
2.1
2.15
2.2
Current
Vd = 5V, Iq = 100mA, 2140 MHz
WCDMA TM-1 64 DPCH
ACPR
Vd = 5V, Iq = 100mA, 2140MHz
WCDMA TM-1 64 DPCH
-30
180
170
150
140
25degC
130
-40degC
85degC
120
110
ACPR (dBc)
Current (mA)
-35
160
-40
25degC
-45
-40degC
-50
85degC
-55
100
-60
90
80
-65
10
11
12
13
14
15
16
17
18
19
Output Power (dBm)
20
21
22
23
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Output Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Typical S-Parameter and Noise Performance: 2.45 GHz
5V, 100mA, App CKT @ 2500MHz
25
20
2.45GHz
-40
25
85
Unit
Gain
14.0
13.7
12.8
dB
P1dB
26.8
26.6
26.2
dBm
NF
3.8
4.1
4.9
dB
15
S11
S21
S22
10
dB
5
0
-5
-10
-15
-20
-25
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
5V, 100mA, App CKT @ 2500MHz
25
20
15
S11
S21
S22
10
dB
5
0
-5
-10
-15
-20
-25
2.4
2.45
2.5
2.55
2.6
2.65
Frequency (GHz)
2.7
2.75
2.8
ACPR
Vd = 5V, Iq = 100mA, 2450MHz
WCDMA TM-1, 64 DPCH
Current Vs Output Power
Vd = 5V, Iq = 100mA, 2450MHz
WCDMA TM-1, 64 DPCH
-20
180
-25
150
140
25degC
130
-40degC
120
85degC
ACPR (dBc)
Current (mA)
170
160
-30
-35
25degC
-40
-40degC
-45
85degC
-50
110
-55
100
-60
90
-65
80
10
10
11
12
13
14
15
16
17
18
19
20
21
22
11
12
13
14
15
16
17
18
19
20
21
22
23
23
Output Power (dBm)
Output Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Typical S-Parameter and Noise Performance: 2.75 GHz
5V, 100mA, App CKT @ 2500MHz
25
20
2.75GHz
-40
25
85
Unit
Gain
12.3
11.9
11.0
dB
P1dB
25.4
25.2
24.8
dBm
NF
4.7
5.5
7.5
dB
15
S11
S21
S22
10
dB
5
0
-5
-10
-15
-20
-25
0
0.5
1
1.5
2
2.5
Frequency (GHz)
3
3.5
4
5V, 100mA, App CKT @ 2500MHz
25
20
15
S11
S21
S22
10
dB
5
0
-5
-10
-15
-20
-25
2.4
2.45
2.5
2.55
2.6
2.65
Frequency (GHz)
2.7
2.75
2.8
Current Vs Output Power
Vd = 5V, Iq = 100mA, 2750MHz
WCDMA TM-1, 64 DPCH
ACPR
Vd = 5V, Iq = 100mA, 2750MHz
WCDMA TM-1, 64 DPCH
180
-20
170
150
140
25degC
130
-40degC
120
85degC
ACPR (dBc)
Current (mA)
-25
160
-30
-35
25degC
-40
-40degC
-45
85degC
110
-50
100
-55
90
-60
80
-65
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Output Power (dBm)
Output Power (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-2.7 GHz InGaP HBT
Matched Gain Block Amplifier
January 2008 - Rev 18-Jan-08
CGB8001-SC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
CGB8001-SC-0G00
CGB8001-SC-0G0T
PB-CGB8001-SC-00A0
PB-CGB8001-SC-00B0
PB-CGB8001-SC-00C0
Description
Matte Tin plated RoHS compliant SOT-89 surface mount package in bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface mount package in tape and reel
Evaluation Board for 850-950 MHz
Evaluation Board for 1800-2200 MHz
Evaluation Board for 2400-2800 MHz
We also offer the plastic packages with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 8
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.