MITSUMI Solid Optical Fingerprint Sensor SEF-A1F1 OUTLINE An optical sweep-type compact fingerprint sensor. Eliminates the shortcomings of conventional optical fingerprint sensors, which are large and heavy due to use of lenses and prisms. The interdigital scattered light method realizes stable, high-accuracy detection at lowcost with a major reduction in size and weight. Increased resistance to static and shock make this technology ideal for inclusion with a variety of devices. FEATURES 1. Small size and light weight achieved by molding optical components as one piece. 2. The semiconductor is not exposed, giving excellent durability. 3. Waterproofing improved through use of a flange. 4. The finger scattered light method allows use on wet fingers. 5. The light filter allows use on dry fingers. 6. A signal processing LSI can be provided (supports SPI and parallel I/F). USES 1. PC units, portable information devices, network terminals 2. IC card readers 3. Security devices MITSUMI Solid Optical Fingerprint Sensor SPECIFICATIONS Item Fingerprint detection method Structure Pixels Sweep speed Temperature range Electrostatic discharge resistance Power source voltage Consumption current Dimensions Specification Sweep-type interdigital scattered light method Single-unit mold including light-source LEDs 600dpi-256 pixels/line 10cm/sec Storage: -20 to +80°C, Operation:-5 to +70°C 20kV or greater 5.0±0.5V 35mA typ. 18.2 (W) 4.8 (D) 2.8 (H) mm (not including flange) *Specifications may be changed for the purpose of improvement and upgrading. DIMENSIONS PIN No. 1 13 8.2 ±1 49 ±3 FPC Light Lead Block Finger Sweep Center Image Guide Mold PWB Unit: mm