SD-A3670 Series VCXO Series (PECL) SD-A3670 Series Rev H Frequency Range: 70.0 MHz to 200.0 MHz Description The SD-A3670 Series of voltage controlled quartz crystal oscillators provide frequency control by applying a voltage to Pin 1. This unit supplies DPECL compatible outputs which are enabled when Pin 2 is set to a logic low or left open. Features Size, mm 5x7 I/O 6 pad Supply Voltage 3.3V • Wide Absolute Pull Range • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low jitter - Wavecrest jitter characterization available • Wide frequency range—70.0 MHz to 200.0 MHz • User specified tolerance available • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum • Space-saving alternative to discrete component oscillators • High shock resistance, to 1000g • 3.3 Volt operation • Metal lid electrically connected to ground to reduce EMI • High Q crystal actively tuned oscillator circuit • Power supply decoupling internal • No internal PLL avoids cascading PLL problems • High frequencies due to proprietary design • Gold plated pads • RoHS Compliant, Lead Free Construction Creating a Part Number SD - A367X - FREQ Package Code SD 6 pad 5x7 mm SMD Tolerance/Performance 0 ±100 ppm 0-70°C 9 Customer Specific C ±100 ppm -40 to +85°C Input Voltage Code Specification A 3.3 V Drawing Specifications Electrical Connection Pin 1 2 3 4 For the most up to date specifications on each NEL product, log on to our website— www.nelfc.com 5 6 Dimensions shown in inches and millimeters. 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone: 262-763-3591 Fax: 262-763-2881 Email: [email protected] www.nelfc.com Connection VCO Enable VEE Output Output Complement VCC VCXO Series (PECL) SD-A3670 Series Rev H Frequency Range: 70.0 MHz to 200.0 MHz Operating Conditions and Output Characteristics Electrical Characteristics Parameter Symbol Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Jitter, RMS(1) Absolute Pull Range VCO Input Impedance VCO Linearity Transfer Function(2) — — VOL VOH tr, tf — APR — — — General Characteristics Parameter Symbol Supply Voltage Supply Current Output Current Operating Temperature Storage Temperature Power Dissipation Lead Temperature Load Conditions — @VO /2 — — 20-80% VO — VCO=0.3 to 3.0V 50 na dc current max VCO=0.3 to 3.0V VCO=0.3 to 3.0V 70.0 MHz 45/55% VCC -1.810 VDC VCC -1.200 VDC — — ±100ppm 100K ohm — — Min Typical Conditions Min Typical VCC-VEE 3.135 V Nominal ICC — — — 0.0 mA IO TA — 0ºC TS — -55ºC — — PD TL Soldering, 10 sec. — 50 ohm to VCC -2 V or Thevenin Equivalent, Bias Required — — — — — — 3 psec — — — Positive Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55 Hz to 2000 Hz 300ºC for 10 seconds Leak rate less than 1 x 10 -8 atm.cc/sec of helium Footnotes: 1) Jitter performance is frequency dependent. Please contact factory for full Wavecrest characterization. RMS jitter bandwidth of 12kHz to 20MHz. 2) Frequency increase with increase in control voltage and is monotonic. 3.3 V — — — — — — — Max 200.0 MHz 55/45% VCC -1.620 VDC VCC -0.880 VDC 600 ps — — — 10% — Max 3.465 V 60 mA ±50.0 mA 70ºC 125ºC 208 mW 300ºC —