NTE805 Integrated Circuit IF Gain Block for FM Receiver Description: The NTE805 provides function of an IF gain block and is designed for use in communications and FM receivers. The device consists of a three−stage limiting amplifier operating from a regulated power supply, and 330Ω input and output terminations with 7.0pF of shunt capacitance required for 10.7MHz ceramic filters. The device also offers a 7.7 voltage regulated supply for external use from pin 6. Features: D Gain at 10.7MHz: 35dB Typ. D Operating Voltage Range: 10V to 20V D Excellent Temperature Stability D Power Supply Rejection Ratio: 40dB Typ. Absolute Maximum Ratings: Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Supply Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Input Voltage (Pin 1 and Pin 3), VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±3.0V Internal Power Consumption (PD at 70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mW Output Current (Pin 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25° to +70°C Storage Temperature Range, TS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +150°C Note 1. Derate at the rate of 8.3mW°C at temperatures above +25°C Operating Conditions: (TA = +25°C, VCC = 12V unless otherwise specified) Parameter Symbol Test Pin Test Conditions 8 Min Typ Max Unit 14 18 25 mA − − 400 mW Supply Current ICC Total Device Dissipation Pd Terminal Voltage (Note 2) V1 1 − 1.2 − V V2 1 − 1.2 − V V3 1 − 2.4 − V V5 1 − 2.0 − V V6 1 7.2 7.7 8.3 V V7 1 − 2.0 − V I6 = 5mA Note 2. All DC Voltage readings are with respect to network ground. Dynamic Electrical Characteristics: (TA = 25°C, VCC = 12V, f = 10.7MHz, unless otherwise specified) Min Typ Max Unit 5 − 110 − mVrms 5 − 1.5 − mVrms Rin 1−2 270 330 390 Ω Parallel Input Capacitance Cin 1−2 5 7 10 pF Output Impedance Parallel Output Resistance Rout 5 270 330 390 Ω Cout 5 5 7 10 pF Output Voltage Gain AVout 5 Vin = 100mVrms, f = 1MHz − 35 − dB Power Supply Rejection VSR 5 Vin = 250mVrms f = 100Hz − −40 − dB Parameter Output Voltage Swing Symbol Test Pin VOM Output Noise Voltage Input Impedance Parallel Input Resistance Parallel Output Capacitance Test Conditions Pin Connection Diagram IF Input 1 8 VCC IF Input Decouple 2 7 Low IF Output VCC Decoupling 3 6 Regulated Output 5 High IF Output GND 4 8 5 .256 (6.52) Max 1 4 .393 (10.0) Max .300 (7.62) .150 (3.81) .100 (2.54) .070 (1.77) Min .300 (7.62)