www.hamlin.com 55100 Miniature Flange Mount Hall Effect Proximity Sensor Features Benefits Applications ● Magnetically operated position sensor ● Digital, latching or programmable analogue types available ● Medium, high or programmable sensitivities ● 3 wire (voltage output) or 2 wire (current output) versions ● Reverse/Over voltage protection ● Built in temperature compensation ● ● ● ● High switching speed up to 10kHz Long life; up to 20 billion operations Unaffected by harsh environments Operates in static or dynamic magnetic field ● Customer selection of cable length and connector type ● ● ● ● ● ● DIMENSIONS (in) mm Position and limit sensing RPM measurement Flow metering Commutaion of brushless dc motors Angle sensing Magnetic encoders BLOCK DIAGRAM Notes: 1) Add capcitor Cn as shown, close to the sensor, for transient suppression if required. 2) Add resistor Rpu as shown for sinking output SPECIFICATIONS Hall Type Supply Voltage (Note 1) A - Analogue 2 Wire (Current Output) (Programmable Only) (Note 2) Vdc -15 to +28 -15 to +28 8.5 Operate Vdc +3.8 to +24 +3.75 to +24 4.5 - 5.5 Overvoltage Protection Vdc - max. 32 32 19.5 Sinking output N/A 4.65 Vdc - max. 0.4 @ 10mA N/A 0.35 mA - max. 10 N/A -1.0 to +1.0 1.6 - 5.2 1.6 - 5.2 5 - 6.9 12 - 17 2 - 10 2 - 10 Vdc Output Low Voltage Output Current (continuously on) Low High mA mA Switching Speed Temperature Digital Switch or Digital Latch 3 Wire (Voltage Output) Absolute Ratings Output High Voltage Current Consumption Over Temperature Range Digital Switch or Digital Latch Operating Storage mA 10 10 2 °C °C -40 to +100 -65 to +105 -40 to +100 -65 to +105 -40 to +100 -65 to +105 Note 1: As long as Tj (Junction Temperature max. Is not exceeded. Note 2: Preprogrammed by Hamlin or Customer pending agreement. CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 1 TABLE 3 TABLE 2 HALL OPTIONS Cable Length:- Termination Options:- ACTIVATE DISTANCES ARE APPROXIMATE (Cable Type 24AWG 7/32 PVC 105° C UL 1430/UL1569) SELECT OPTION USING NEFEB MAGNET (.827l x .276W x .185H) 21 x 7 x 4.7 HAMLIN P/N 5812334000 Select Hall Option Hall Type Sensitivity Gauss (typ.) Activate - d (in) mm 2M 2 Wire Switch 120 (.531) 13,5 2H 2 Wire Switch 57 (.728) 18,5 2L 2 Wire Latch 40 3M 3 Wire Switch 130 3H 3 Wire Switch 3L 3 Wire Latch AP Analog SELECT OPTION CABLE LENGTH (in) mm 01 (3.94) 100 02 (11.81) 300 (.827) 21,0 03 (19.69) 500 (.492) 12,5 04 (29.53) 750 59 (709) 18,0 05 86 (.394) 10,0 (39.37) 1000 Programmable Consult Hamlin ORDERING INFORMATION 55100 XX XX Series 55100 Hall Option Table 1 Cable Length Table 2 Table 3 Termination Hamlin USA Hamlin Europe Hamlin China DESCRIPTION (2 WIRE VERSION ILLUSTRATED Standard Lengths Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] Tel: +44 (0)1603 257700 • Fax: +44 (0)1603 257702 • Email: [email protected] Tel: +86 (0) 512 69365 800 • Fax: +86 (0) 512 69365 811 • Email: [email protected] DRGNo: 55100XXXXX REV : AG Date:9/6/12 DCR: B9016 X A Tinned Leads D AMP MTE 2.54mm pitch E JST XHP 2.5mm pitch