www.hamlin.com 55505 Hall Effect Flange Mount Geartooth Sensor Features ● Ferrous target sensing ● Internal circuit protection ● Protection against severe and automotive environments ● Self adjusting magnetic range ● Automotive grade circuit protection ● High speed operation ● Short circuit and reverse voltage protection ● On board 10 bit A/D convertor Benefits ● No chopper delay ● Rotational alignment to target not critical ● Immune to target run out Benefits ● Wheel, transmission and camshaft speed sensing ● Geartooth sensor ● Rotary encoders ● Industrial ● Commercial ● Automotive DIMENSIONS (in) mm SPECIFICATIONS Hall Type Digital Switch 3 Wire (Voltage Output) Supply Voltage Operate Vdc 4.75 to 24 Supply Voltage Overvoltage Protection Vdc - max. 27 Supply Voltage Reverse Voltage Protection Vdc - max. -25 Output High Voltage Vdc VDD -2 (-2 sinking output with internal pull-up) Output Low Voltage Vdc - max. 0.6 @ 20mA Output Current (continuously on) mA - max. 20 Current Consumption mA - max. 1 Current Consumption mA - max. 10.5 Switching Speed kHz - max. 15 Temperature Operate °C -40 to +125 Temperature Storage °C -65 to +125 APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination TABLE 1 TABLE 2 Cable Length:(Cable Type 20AWG Type TXL per SAE J-1128) Termination Options:SELECT OPTION Standard Lengths SELECT OPTION CABLE LENGTH (in) mm 01 (3.94) 100 02 (11.81) 300 03 (19.69) 500 04 (29.53) 750 05 (39.37) 1000 DESCRIPTION A Tinned Leads B Deutsch DTM04-3P C Molex MX 150 ORDERING INFORMATION 55505 59036 00 Series 55505 Hamlin USA Hamlin Europe Hamlin China Cable Length Table 1 Termination Table 2 Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] Tel: +44 (0)1603 257700 • Fax: +44 (0)1603 257702 • Email: [email protected] Tel: +86 (0) 512 69365 800 • Fax: +86 (0) 512 69365 811 • Email: [email protected] DRGNo: 55505XXXXX REV : AD Date: 9/6/12 DCR: B9016 XX T X