Chip Type Cermet Trimmer Potentiometer 2mm size, Low profile type 䂓Features Low profile type (0.8mm in height) Achieved exellent endurance characteristics by using "Metal-glaze" film. Conform to RoHS Directives Reflow solderable 䂓Dimensins Unit (mm) 0. 8 2. 2 Terminal 2 1 Resin 1 0.6 1.3 1. 15 1.8 1. 5 1 1 2. 8 1. 3 0. 6) 1. 1 0. 45 0. 3 Terminal 1 Terminal 3 0. 7 1. 3 0.7 1. 9 1.9 C.W. Circuit PCB Footprint Terminal 1 Terminal 3 Terminal 2 䂓Specification Item Nominal Total Rasistance Rasistance Tolerance Rotational Torque Total Mechanical Rotation Angle Specification Unit 100 ~ 1 M ±25 㱅 % 0.49 䌾 7.84 mN䊶m 240㫧20 㫦 W 0.1 Rated Wattage Max. Working Voltage ±250 V ppm/㷄 -40 䌾 100 㷄㩷 50 or V= PR whichever is smaller T.C.R. (Temperature Coefficient of Resistance) Operating Temperature Range Note Without stopper 䂓Model Designation VG 026 CH XT B*** Characteristic and Resistance value (3 figures) Taping type (8mm width㬍4mm pitch emboss taping for auto insertion) SMD type Size Model No. Resistive element type (Metal-glaze) *Packaging Quantity : 3,000pcs / Reel HOKURIKU Specifications are subject to change without notice. 1 Chip Type Cermet Trimmer Potentiometer チップ型サーメット皮膜ｾﾗﾐｯｸ半固定可変抵抗器 3mm size, Low profile type 3mm サイズ、薄形 ■ Features ・Low profile type ( 1.2mm in height ) ・Achieved good endurance characteristics by using “Metal-glaze” for the material of resistor ・Conforms to RoHS Directives ・Reflow solderable ■Outline Dimensions (Unit : mm) 摺動子回転範囲 Wiper Rotating Area TERM.2 1.6 0.7 1.2 推奨ランドパターン寸法 Pattern Application Example 1.5 0.75 1.5 裏面封止樹脂 Resin 0.8 0.65 TERM.3 2.7 1.2 0.95 1.2 2 3.8 (1) 0.5 1.75 φ3.7 3 2.1 1.2 0.8 1.2 TERM.1 C.W. Circuit Term. 1 Term. 3 Term. 2 ■Specification Item Nominal Total Resistance Resistance Tolerance Rotational Torque Effectively Rotary Angle Rated Wattage Max. Rated Voltage T.C.R（Temperature Coefficient） Operating Temp. Range Specification Unit 100～1M ±25 0.98～11.76 270 ± 20 0.15 Ω % mN.m ° Ｗ V ppm/℃ ℃ 50 or V= PR whichever is smaller ±250 -40 ～ +100 Note Non stopper ■Part Designation VG 039N SN XT B＊＊＊ Resistance law and Resistance value ( 3 figures ) Taping type (8mm width×4mm pitch emboss taping for auto insertion) SMD Type ( Non stopper ) Size Resistive element type : Metal-glaze ＊Packaging Quantity ： 2500 pcs / Reel 2012.4.19 HOKURIKU ※Specifications are subject to change without notice 2 Chip Type Cermet Trimmer Potentiometer 3mm size, Low profile type ■Features Low profile type (1.2mm in height) With rotation stopper Achieved exellent endurance characteristics by using "Metal-glaze" film. Conform to RoHS Directives Reflow solderable ■Dimensions (Unit: mm) φ3. 7 （Wiper Rotating Area) 3 1. 5 1. 2 Terminal 2 Resin 0. 75 1.6 Terminal 1 0. 65 2. 7 C.W. Circuit Terminal 1 1.5 1.2 1.2 0. 8 Terminal 3 1.2 0. 95 2 3. 8 ( 1 ) 0. 5 1. 75 0.7 2. 1 0.8 1.2 PCB Footprint Terminal 3 Terminal 2 ■Specification Item Specification Unit 100 ~ 1 M ±25 Ω % Rotational Torque 0.98∼ 11.76 mN・m End Stop Strength 14.7 min. mN・m Total Mechanical Rotation Angle 270±20 0.15 ° W 50 or V= PR whichever is smaller V Nominal Total Rasistance Rasistance Tolerance Rated Wattage Max. Working Voltage T.C.R. (Temperature Coefficient of Resistance) Operating Temperature Range ±250 ppm/℃ -40 ∼ 100 ℃ Note With rotation stopper ■Model Designation VG 039N CH XT B*** Characteristics and Resistance value (3 figures) Taping type (8mm width×4mm pitch emboss taping for auto insertion) SMD type Size Model No. Resistive element type (Metal glaze) *Packaging Quantity : 2,500pcs / Reel HOKURIKU Specifications are subject to change without notice. 3 Chip Type Cermet Trimmer Potentiometer 3mmsize, Back side adjust type ■Features Adjusting from back side and low profile type Non Rotation Stopper Achieved excellent endurance characteristics by using "Metal-glaze" film. Conform to RoHS Directives Reflow solderable ■Dimensions (Unit: mm) 3 0.97 1.3 0.5 1.4 Non Plating Area 1.1 2.3 Terminal 2 0.9 0.6 Terminal 1 φ3. 5 C.W. Terminal 1 1.1 Treminal 3 0.7 1.4 ( Wiper Rotating Area) Circuit 2.3 Driver Slot Width 0.45 Depth 0.3 2 3. 8 φ1.4 φ1.8 1.7 3.2 2.8 Pattern Application Terminal 3 Terminal 2 ■Specification Item Nominal Total Rasistance Rasistance Tolerance Rotational Torque Total Mechanical Rotation Angle Rated Wattage Max. Working Voltage T.C.R. (Temperature Coefficient of Resistance) Operating Temperature Range Specification Unit 100 ~ 1 M ±25 Ω % 0.98∼ 7.84 mN・m 260±20 0.15 ° W 50 or V= PR whichever is smaller V ±250 ppm/℃ -40 ∼ 100 ℃ Note Non rotation stopper ■Model Designation VG 039 CB SN XT B*** Resistance law and resistance value (3 figures) Taping type (8mm width×4mm pitch emboss taping for auto insertion) Non Rotation stopper SMD for back side adjustment Size Model No. Resistive Element type (Metal-glaze) *Package Quantity : 2,000 pcs / Reel HOKURIKU Specifications are subject to change without notice. 4