Pressure Sensor Module Model No. HPM-**-*** This pressure sensor, fabricated with advanced semiconductor micromachining technology, is highly sensitive and highly precise and meets a variety of customer needs. Custom product is also flexibly available to fit the needs. ■Features ・Analog output, Digital output (frequency output) available ・Perform various digital compensation by built-in EEPROM, High precision・High stability ・Low current consumption: 1ｍA Max. ・Flange-mount connector type, Discrete type ■ Outline Dimension 4 3 2 1 5 6 7 8 大気圧 導入口 4.0 9.2 φ5.8 φ2 14.0 2.0 3.0 100GA Bxx XXXXX HDK 10.0 5 100GA A01 XXXXX HDK 10.0 11.5 4. 20 φ6±0.1 φ8.8±0.1 Φ 2- (20.5) 4 6 (10.0) 2.0 4.0 4.0 φ3.0 2±0.2 50±0.5 40 32.1±0.5 (22.6) Discrete type: HPM－＊＊－B＊＊ 10-0.25 Flange-mount connector type: HPM－＊＊－A＊＊ C 0.5 P2.5 VOUT GND VCC [対応プラグハウジング] 日本圧着端子製 XMP-03V相当 14.0 8-0.6 [一般公差] ±0.3mm 9.2 1.4 2-P 2.5x3= 7.5 ■Basic Specification 1. Absolute Maximum Rating Item Rating Unit Remark MIN MAX Storage Temperature Range Operating emperature Range Operating Humidity Range -40 -10 0 85 60 95 ℃ ℃ %RH Operating Voltage Range -0.3 6.5 V Measurable Pressure Range -90 980 2. Electrical Characteristics（Vdd = 5［V］、-10～60℃、-29.4～68.6kPa） Item HPM-100GD-A01 Output Function HPM-100GA-A01 TYP 0.7 mA、 HPM － ＊＊G＊ － ＊＊ ① ② ③ ④ 2012.7.10 HPM-100GA-B01 Output Form： DC MAX 1.0 mA 26－[a×[P【ｋPa】＋29.4]] 0.5＋[a×[P【ｋPa】＋29.4]] -Output at 29.4kPa = 26kHz Output at 68.6kPa = 6kHz a = 20/98【kHz/kPa】 -Output at 29.4kPa = 0.5V Output at 68.6kPa = 4.5V a = 4/98【V/kPa】 ±2% FS Output Accuracy ■ Model Designation kPa Output Form： Frequency Current Consumption Base Vdd = 5［V］ Flange-mount type can operate at Vdd = 12［V］. ①：Model No. ②：Full span pressure ③：Output type（A：Analog, D：Digital） ④：Shape, Custom spec No. (A: Flange-mount type, B: Discrete type) HOKURIKU * Specifications are subject to change without notice.