Agilent HSMx-A16x-xxxxx PLCC-2 Surface Mount LED Indicator Black Surface Tinted Data Sheet Features • Industry standard PLCC-2 package • High reliability LED package Description This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior signs application conditions. This SMT LED package come with a black surface and tinted which is specially designed for signs application to minimize ambient reflection to improve contrast. To facilitate easy pick & place assembly, the LEDs are packed in EIAcompliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color, to provide close uniformity. These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they can also be mounted using through-the-wave soldering process. The super wide viewing angle at 120° makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. • High brightness using AlInGaP and InGaN dice technologies • Available in full selection of colors • Super wide viewing angle at 120° • Available in 8 mm carrier tape on 7 inch reel (2000 pieces) • Compatible with both IR and TTW soldering process • Black Surface Tinted Applications • Electronic signs and signals • Interior full color sign • Variable message sign CAUTION: HSMM and HSMN-A1xx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions Notes: All dimensions in mm Device Selection Guide Color Part Number Min Iv @ 20mA (mcd) Typical Iv @ 20mA (mcd) Red HSMC-A160-Q00J1 63.0 100.0 HSMC-A161-S00J1 160.0 220.0 HSMZ-A160-T00J1 250.0 350.0 HSMA-A160-Q00J1 63.0 100.0 HSMA-A161-S00J1 160.0 220.0 HSMU-A160-R00J1 100.0 320.0 HSMU-A160-T00J1 250.0 320.0 HSMM-A161-R00J1 100.0 200.0 HSMM-A160-S00J1 160.0 350.0 HSMN-A161-N00J1 25.0 50.0 HSMN-A160-P00J1 40.0 70.0 Yellow /Amber Green Blue Notes: The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2 Absolute Maximum Ratings (TA = 25°C) Parameters HSMC/A HSMV/Z HSMM/N DC Forward Current[1] 30 mA[3,4] 30 mA[3,4] 30 mA Peak Forward Current[2] 100mA 100mA 100mA Power Dissipation 63mW 72mW 114mW Reverse Voltage 5 5 5 Junction Temperature 110°C 110°C 110°C Operating Temperature -55°C to +100°C -55°C to +100°C -55°C to +100°C Storage Temperature -55°C to +100°C -55°C to +100°C -55°C to +100°C Notes: 1. Derate linearly as shown in figure 2. Duty factor = 10%, Frequency = 1kHz. 3. Drive Current between 10mA and 30mA are recommended for best long term performance 4. Operation at current below 5mA is not recommended. Optical Characteristic (TA = 25°C) Dominant Wavelength λD (nm)[1] Typ. Viewing Angle 2θ1/2 [2] (Degrees) Typ. Luminous Luminous Intensity/ Efficacyηv[3] Total Flux (lm/W) Iv(mcd)/Fv(mlm) Typ Typ. Color Part Number Peak Dice Wavelength Technology λPEAK (nm) Typ. Amber HSMA-A16x AlInGaP 592 590 120 480 0.45 Amber HSMU-A160 AlInGaP 594 592 120 500 0.45 Red HSMC-A16x AlInGaP 635 626 120 150 0.45 Red HSMZ-A160 AlInGaP 639 630 120 155 0.45 Green HSMM-A16x InGaN 523 525 120 500 0.45 Blue HSMN-A16x InGaN 468 470 120 75 0.45 Notes: 1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt. Electrical Characteristic (TA = 25°C) Forward Voltage VF (Volts) @ IF = 20mA Reverse Voltage VR @ 100µA Reverse Voltage VR @ 10µA Thermal Resistance RθJP (°C/W) Typ Max Min Min Typ HSMC/A 1.9 2.4 5 - 280 HSMV/Z 2.2 2.6 5 - 280 HSMM/N 3.4 4.05 - 5 280 Dice Technology 3 1 Green Blue Amber 35 Red FORWARD CURRENT - mA 30 RELATIVE INTENSITY 0.8 0.6 0.4 0.2 HSMA/C 20 15 10 HSMM/N 5 0 0 380 430 480 530 580 630 680 730 0 780 0.5 1 WAVELENGTH - nm 540 1.4 530 DOMINANT WAVELENGTH - nm RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20mA) 2 2.5 3 3.5 4 Figure 2. Forward Current vs. Forward Voltage 1.6 AlInGaP 1.2 1.0 InGaN 0.8 1.5 FORWARD VOLTAGE -V Figure 1. Relative Intensity vs. Wavelength 0.6 0.4 0.2 0 InGaN Green 520 510 500 490 480 InGaN Blue 470 460 0 5 10 15 20 25 30 DC FORWARD CURRENT -mA 4 HSMU/Z 25 35 0 5 10 15 20 25 30 CURRENT - mA Figure 3. Relative Intensity vs. Forward Current Figure 4. Dominant Wavelength vs. Forward Current − InGaN Figure 5. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJ MAX = 110 °C, RθJA 500 °C/W Figure 6. Forward Voltage Shift vs. Temperature 35 Figure 7. Radiation Pattern 10 to 20 SEC. 240˚C MAX. 3˚C/SEC MAX. -6˚C/SEC MAX. 183˚C 100-150˚C TEMPERATURE TEMPERATURE 20 SEC. MAX. 217˚C 255 ˚C +5˚C -0˚C -6˚C/SEC MAX. 3˚C/SEC MAX. 125˚C +/- 25˚C 3˚C/SEC MAX. 60-150 SEC. 60-150 SEC. 120 SEC. MAX. MAX. 120 SEC. TIME Figure 8a. Recommended SnPb Reflow Soldering Profile TIME Figure 8b. Recommended Pb-Free Reflow Soldering Profile Figure 9. Recommended Wave Soldering Profile 5 Figure 10. Recommended soldering pad pattern 6 Figure 11. Tape leader and Trailer dimension Figure 12. Tape dimension 7 Figure 13. Reel dimension Storage Conditions: USER FEED DIRECTION 5 to 30° C @ 60% RH max. Recommended baking conditions: 60 +/- 5°C for 20 hours. Baking is required under the following conditions: CATHODE SIDE a) the humidity indicator card becomes pink in color b) the pack has been opened for more than 4 weeks This product is qualified as Moisture Sensitive JEDEC Level 2A PRINTED LABEL Figure 14. Reeling Orientation 8 Intensity Bin Select (X5X6) Color Bin Select (X7) Color Bin Limits Individual reel will contain parts from 1 half bin only Individual reel will contain parts from 1 full bin only Blue Min (nm) Max (nm) A 460.0 465.0 B 465.0 470.0 X5 Min Iv Bin X7 X6 0 Full Distribution C 470.0 475.0 Z A and B only D 475.0 480.0 0 Full Distribution Y B and C only 3 3 half bins starting from X51 W C and D only Green Min (nm) Max (nm) 4 4 half bins starting from X51 V D and E only A 515.0 520.0 5 5 half bins starting from X51 U E and F only B 520.0 525.0 7 3 half bins starting from X52 T F and G only C 525.0 530.0 8 4 half bins starting from X52 S G and H only D 530.0 535.0 9 5 half bins starting from X52 Q A, B and C only P B, C and D only N C, D and E only Intensity Bin Limits Amber/ Min (nm) Yellow Max (nm) A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Min (nm) Max (nm) Bin ID Min (mcd) Max (mcd) M D, E and F only J1 4.50 5.60 L E, F and G only J2 5.60 7.20 K F, G and H only K1 7.20 9.00 1 A, B, C and D only K2 9.00 11.20 2 E, F G and H only L1 11.20 14.00 L2 14.00 18.00 Red M1 18.00 22.40 Full Distribution M2 22.40 28.50 N1 28.50 35.50 N2 35.50 45.00 P1 45.00 56.00 P2 56.00 71.50 Q1 71.50 90.00 X 8X 9 Q2 90.00 112.50 J1 R1 112.50 140.00 20mA test current, Top Mount, 7 inch Reel R2 140.00 180.00 J2 10mA test current, Top Mount, 7 inch Reel S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 Tolerance of each bin limit = ±1nm Packaging Option (X8X9) Tolerance of each bin limit = ± 12% 9 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright 2004 Agilent Technologies, Inc. July 21, 2004 5989-0496EN