MPR Radial leaded metallized polypropylene film capacitors Features Self Healing Low ESR Stable with frequency and temperature Good pulse current ratings Switching power supplies Ballasts Applications General Purpose AC Applications ( not across the line) Specifications Operating Temperature Range Capacitance Tolerance Peak, AC voltage (50/60 Hz) Dissipation Factor (MAX) 25°C Insulation Resistance @25°C (<70% RH)for 1 minute at 100VDC applied Load Life Damp Heat test Self Inductance Capacitance Drift Factor Capacitance Temperature Coefficient Dielectric Strength Dielectric Construction Coating Leads -55°C to +105°C +10% at 1 kHz, 25°C +5% optional WVDC 250 400 630 VAC 200 220 250 For T>+85°C , The voltage must be decreased by 1.5% per °C Frequency 3uF<C<5u 1uF<C<3uF C<0.1uF 0.1uF<C<1uF C>5uF (kHz) F 1 0.1% 0.1% 0.1% 0.1% 0.1% 100 0.4% 0.7% 1.2% 1.8% 2.8% Insulation Capacitance Resistance <0.33μF 30000 MΩ >0.33μF 10000 MΩxμF 2000 Hours, +85C with 125% of rated voltage Capacitance Change <3% of initially measured value Dissipation Factor <0.001 at 1kHz and 25°C Insulation Resistance >50% of maximum specified value 56 days at40°C with 90 to 95%RH, +40°C and no voltage applied Capacitance Change <5% of initially measured value Dissipation Factor <0.005 at 1kHz and 25°C Insulation Resistance >50% of maximum specified value <1 nano-Henry per mm of body length and lead length <0.5% after 2 years at 40°C -200 ppm/°C, +100ppm/°C Terminal to Terminal 200% of rated VDC or VAC applied for 10 Seconds and 25°C Polypropylene Metallized film Flame Retardant epoxy resin (UL94V0) Lead free tinned copper leads L MAX S+1.0 G MAX d +0.05 12 10 1.5 0.6 18.5 15 1.5 0.8 26 22.5 1.5 0.8 31 27.5 1.5 0.8 MPR Capacitance (µF) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/µ sec.) 0.01 103MPR400K 350 0.01 103MPR630K 420 0.015 153MPR250K 220 0.015 153MPR400K 0.015 Metallized Polypropylene Epoxy Dipped Radial Lead Capacitance (µF) IC PART NUMBER 0.6 0.1 104MPR630K 230 0.6 0.15 154MPR250K 200 10 0.6 0.15 154MPR400K 13x9.5x5 10 0.6 0.15 420 13x11x7 10 0.6 223MPR250K 220 13x9x5 10 0.022 223MPR400K 350 13x10.5x5.5 0.022 223MPR630K 420 0.033 333MPR250K 0.033 S (MM) d (MM) 13x9x5 10 13x10x6 10 13x9x5 350 153MPR630K 0.022 dv/dt Dims LxHxT (mm) (v/µ sec.) S (MM) d (MM) 26x15x10 22.5 0.8 18x11x7 15 0.8 185 26x13x7.5 22.5 0.8 154MPR630K 230 26x17x11 22.5 0.8 0.22 224MPR250K 200 18x12.5x7.5 15 0.8 0.6 0.22 224MPR400K 165 26x14x8.5 22.5 0.8 10 0.6 0.22 224MPR630K 180 31x17.5x10.5 27.5 0.8 13x12.5x8.5 10 0.6 0.33 334MPR250K 200 18x13x8.5 15 0.8 220 13x9x5.5 10 0.6 0.33 334MPR400K 165 26x15x10 22.5 0.8 333MPR400K 350 13x11x6.5 10 0.6 0.33 334MPR630K 180 31x21.5x13 27.5 0.8 0.033 333MPR630K 400 18x11.5x7.5 15 0.8 0.47 474MPR250K 110 26x14x8.5 22.5 0.8 0.047 473MPR250K 220 13x9.5x5.5 10 0.6 0.47 474MPR400K 150 31x16.5x10.5 27.5 0.8 0.047 473MPR400K 350 13x11x7.5 10 0.6 0.47 474MPR630K 180 31x24.5x15.5 27.5 0.8 0.047 473MPR630K 400 18x13.5x8.5 15 0.8 0.68 684MPR250K 115 26x15x9.5 22.5 0.8 0.068 683MPR250K 220 13x10.5x6 10 0.6 1 105MPR250K 110 26x16x12 22.5 0.8 0.068 683MPR400K 300 18x12x6.5 15 0.8 1 105MPR400K 150 31x22x15 27.5 0.8 0.068 683MPR630K 400 18x15.5x9.5 15 0.8 1.5 155MPR250K 100 31x18x13 27.5 0.8 0.1 104MPR250K 220 13x11x7 10 0.6 2.2 225MPR250K 100 31x21x15 27.5 0.8 0.1 104MPR400K 300 18x12.5x7.5 15 0.8