ISAHAYA INC6008AP1

<SMALL-SIGNAL TRANSISTOR>
PRELIMINARY
INC6008AP1
Notice:This is not a final specification
Some parametric are subject to change.
FOR LOW FREQUENCY AMPLIFY APPLICATION
SILICON NPN EPITAXIAL TYPE
DESCRIPTION
OUTLINE DRAWING
UNIT:mm
4.6 MAX
1.6
INC6008AP1 is a silicon NPN transistor.
It is designed with high voltage.
1.5
0.8 MIN
・High collector current
C
E
・High voltage VCEO = 140V
Ic=1A
・Low voltage VCE(sat) = 0.7V(MAX)
B
2.5
・Small package for easy mounting.
4.2 MAX
FEATURE
0.53
MAX
0.4
0.48 MAX
1.5
3.0
APPLICATION
マーキング
MARKING
Relay drive, Power supply
TERMINAL
CONNECTOR
電極接続
E:EMITTER
E: エミッタ
JEITA:SC-62
EIAJ
: SC-62
JEDEC:SOT-89
JEDEC :
C: コレクタ
C:COLLECTOR
B: ベース
B:BASE
JEDEC:―
MAXIMUM RATING(Ta=25℃)
SYMBOL
VCBO
PARAMETER
Collector to Base voltage
VEBO
Emitter to Base voltage
VCEO
Collector to Emitter voltage
I
Collector current
C
RATING
UNIT
160
V
5
V
140
V
1
A
PC
Collector dissipation(Ta=25℃)
500
mW
Tj
Junction temperature
+150
℃
Tstg
Storage temperature
-55~+150
℃
MARKING
Type Name
B H
W
LOT №
hFE ITEM
ELECTRICAL CHARACTERISTICS(Ta=25℃)
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
LIMITS
TYP
MAX
UNIT
V(BR)CBO
C to B break down voltage
I C=100μA,I E=0mA
160
-
-
V
V(BR)EBO
E to B break down voltage
I E=100μA,I C=0mA
5
-
-
V
V(BR)CEO
C to E break down voltage
I C=10mA,RBE=∞
140
-
-
V
ICBO
Collector cut off current
VCB=140V,I E =0mA
-
-
100
nA
IEBO
Emitter cut off current
VEB=4V,I C=0mA
-
-
100
nA
hFE1
DC forward current gain1
VCE=10V,I C=150mA
100
-
300
-
hFE2
DC forward current gain2
VCE=10V,I C=1A
-
10
-
-
VCE(sat)
C to E saturation voltage
I C=150mA,I B=15mA
-
-
0.7
V
VBE(sat)
B to E saturation voltage
I C=150mA,I B=15mA
-
-
1.1
V
fT
Gain bandwidth product
VCE=10V,I E=-50mA
100
-
-
MHz
Cob
Collector output capacitance
VCB=10V,I E=0mA,f=1MHz
-
-
15
pF
ISAHAYA ELECTRONICS CORPORATION
<SMALL-SIGNAL TRANSISTOR>
PRELIMINARY
INC6008AP1
Notice:This is not a final specification
Some parametric are subject to change.
FOR LOW FREQUENCY AMPLIFY APPLICATION
SILICON NPN EPITAXIAL TYPE
TYPICAL CHARACTERISTICS(Ta=25℃)
DC FORWARD CURRENT GAIN
VS. COLLECTOR CURRENT
COMMON EMITTER TRANSFER
1000
VCE=10V
VCE=10V
COLLECTOR CURRENT IC(mA)
DC FORWARD CURRENT GAIN hFE (-)
1000
100
10
0.01
100
10
1
0.1
0.01
0.1
1
10
100
COLLECTOR CURRENT IC(mA)
0
1000
300
600
900
1200
BASE TO EMITTER VOLTAGE VBE(V)
BASE TO EMITTERSATURATION VOLTAGE
VS. COLLECTOR CURRE
10000
IC/IB=10
1000
100
10
1
0.1
10
BASE TO EMITTERSATURATION VOLTAGE
VBE(sat)(V)
COLLECTOR TO EMITTERSATURATION VOLTAGE
VCE(sat)(mV)
COLLECTOR TO EMITTERSATURATION
VOLTAGE VS. COLLECTOR CURRENT
1
10
100
COLLECTOR CURRENT IC(mA)
IC/IB=10
1
0.1
1000
0.1
GAIN BAND WIDTH PRODUCT fT(MHZ)
1000
VCE=10V
100
10
1
1
10
EMITTER CURRENT IE(mA)
1
10
100
COLLECTOR CURRENT IC(mA)
1000
COLLECTOR OUTPUT CAPACITANCE
VS. COLLECTOR TO BASE VOLTAGE
100
COLLECTOR OUTPUT CAPACITANCE Cob(pF)
GAIN BAND WIDTH PRODUCT
VS. EMITTER CURRENT
0.1
1500
100
f=1MHz
10
1
0.1
1
10
COLLECTOR TO BASE VOLTAGE VCB(V)
ISAHAYA ELECTRONICS CORPORATION
100
<SMALL-SIGNAL TRANSISTOR>
PRELIMINARY
INC6008AP1
Notice:This is not a final specification
Some parametric are subject to change.
FOR LOW FREQUENCY AMPLIFY APPLICATION
SILICON NPN EPITAXIAL TYPE
COLLECTOR DISSIPATION-AMBIENT TEMPERATURE
1000
0.6
f=1MHz
COLLECTOR DISSIPATION Pc(W)
EMITTER INTPUT CAPACITANCE Cib(pF)
EMITTER INPUT CAPACITANCE
VS. BASE TO EMITTER VOLTAGE
100
10
1
0.5
0.4
0.3
0.2
0.1
0
0.1
1
EMITTER TO BASE VOLTAGE VEB(V)
10
0
20
40
60
80
100
120
AMBIENT TEMPERATURE Ta(℃)
ISAHAYA ELECTRONICS CORPORATION
140
160
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs!
·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or
property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures
such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or
mishap.
Notes regarding these materials
·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the
customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging
ISAHAYA or third party.
·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights ,
originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
·All information contained in these materials, including product data, diagrams and charts, represent information on products
at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics
Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed
herein.
·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an
authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes ,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these
materials.
·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a
license from the Japanese government and cannot be imported into a country other than the approved destination. Any
diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these
materials or the products contained therein.
Mar.2013