MUR1005FCT thru MUR1040FCT Glass Passivated Super Fast Rectifiers Reverse Voltage 50 to 400 Volts Forward Current 10.0 Amperes Features Low power loss, high efficiency Low forward voltage, high current capability High surge capacity Super fast recovery times, high voltage ITO-220AB Mechanical Data Case: ITO-220AB full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: As marked Standard packaging: Any Weight: 0.08 ounces, 2.24 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MUR 1005F C T MUR 1010F C T MUR 1015F C T MUR 1020F C T MUR 1030F C T MUR 1040F C T Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts 50 100 150 200 300 400 Parameter Unit Maximum DC blocking voltage V DC Maximum average forward rectified current at TC=100oC IF(AV) 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150.0 Amps Maximum instantaneous forward voltage at 5.0A per element VF Maximum DC reverse current at rated DC blocking voltage @TC=25oC @TC=100oC Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance Operating junction and storage temperature range 0.95 1.3 Volts Volts 10.0 500 IR 35 trr 50 CJ 62 RθJC 3.0 TJ, TSTG -55 to +150 270 uA nS pF o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 271 www.kersemi.com