MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 Preferred Devices Power Rectifiers http://www.kersemi.com These state−of−the−art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. Features • • • • • • • • Ultrafast 35 and 60 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package High Voltage Capability to 600 V Low Forward Drop Low Leakage Specified @ 150°C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures Pb−Free Packages are Available* ULTRAFAST RECTIFIERS 15 AMPERES, 100−600 VOLTS 1 4 3 4 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AC CASE 221B PLASTIC 1 3 MARKING DIAGRAM AY WWG U15xx KA A Y WW G U15xx KA = = = = = Assembly Location Year Work Week Pb−Free Package Device Code xx = 10, 15, 20, 40 or 60 = Diode Polarity 1 MUR1520/D MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MAXIMUM RATINGS MUR Symbol 1510 1515 1520 1540 1560 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 150 200 400 600 V Average Rectified Forward Current (Rated VR) IF(AV) 15 @ TC = 150°C 15 @ TC = 145°C A Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz) IFRM 30 @ TC = 150°C 30 @ TC = 145°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM Rating Operating Junction Temperature and Storage Temperature Range 200 TJ, Tstg 150 A °C −65 to +175 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Parameter Maximum Thermal Resistance, Junction−to−Case Symbol Value Unit RqJC 1.5 °C/W ELECTRICAL CHARACTERISTICS Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 1) (iF = 15 A, TC = 150°C) (iF = 15 A, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) trr 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://www.kersemi.com 2 1520 1540 1560 0.85 1.05 1.12 1.25 1.20 1.50 500 10 500 10 1000 10 Unit V mA 35 60 ns MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1510, MUR1515, MUR1520 100 100°C 70 25°C 50 30 TJ = 150°C 20 10 100°C 5 2 1 0.5 25°C 0.2 0.1 0.05 7.0 0.02 0.01 0 20 40 5.0 60 80 100 120 140 180 200 160 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 RqJA = 16°C/W As Obtained From A Small TO−220 Heatsink Square Wave 6.0 dc Square Wave RqJA = 60°C/W As Obtained in Free Air, No Heat Sink 2.0 0 0 20 10 Square Wave 8.0 6.0 4.0 Rated Voltage Applied 2.0 0 140 150 160 170 Figure 3. Current Derating, Case 10 4.0 dc 12 Figure 1. Typical Forward Voltage dc 8.0 14 TC, CASE TEMPERATURE (°C) 14 12 16 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 50 10 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 IR, REVERSE CURRENT (m A) 100 TJ = 150°C 40 60 80 100 120 140 160 180 200 180 16 I (Resistive Load) PK = π IAV 14 I (Capacitive Load) PK =5.0 IAV 12 dc 10 10 8.0 20 6.0 Square Wave 4.0 TJ = 125°C 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation http://www.kersemi.com 3 16 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1540 100 100 TJ = 150°C 50 IR, REVERSE CURRENT (m A) 70 50 100°C TJ = 150°C 25°C 30 5 25°C 2 1 0.5 10 7.0 0.02 0.01 0 50 100 5.0 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 Square Wave 8.0 6.0 4.0 Rated Voltage Applied 2.0 0 140 150 160 dc RqJA = 16°C/W As Obtained From A Small TO−220 Heatsink 8.0 Square Wave 6.0 4.0 dc Square Wave RqJA = 60°C/W As Obtained in Free Air, No Heat Sink 0 40 60 80 100 120 140 160 180 200 16 (Resistive Load) 14 IPK =π IAV dc I (Capacitive Load) PK =5.0 IAV 12 180 170 Figure 8. Current Derating, Case 10 20 dc 12 Figure 6. Typical Forward Voltage 12 0 14 TC, CASE TEMPERATURE (°C) 14 2.0 16 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100°C 0.2 0.1 0.05 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 20 10 10 10 Square Wave 20 8.0 6.0 TJ = 125°C 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient Figure 10. Power Dissipation http://www.kersemi.com 4 16 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1560 200 100 70 50 IR, REVERSE CURRENT (m A) 100 50 TJ = 150°C 30 100°C 25°C 10 2 1 0.5 25°C 0.2 0.1 0.02 150 200 250 5.0 300 350 400 450 500 600 650 550 VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 dc 12 Square Wave 10 8.0 6.0 4.0 Rated Voltage Applied 2.0 0 140 160 150 170 Figure 11. Typical Forward Voltage Figure 13. Current Derating, Case dc 9.0 8.0 RqJA = 16°C/W As Obtained From A Small TO−220 Heatsink Square Wave 6.0 5.0 4.0 14 TC, CASE TEMPERATURE (°C) 10 7.0 16 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100°C 5 0.05 7.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 150°C 20 10 dc 3.0 Square Wave RqJA = 60°C/W 1.0 As Obtained in Free Air, No Heat Sink 0 0 20 40 60 80 100 120 2.0 140 160 180 200 16 180 I (Capacitive Load) PK =5.0 IAV 14 dc 10 12 20 10 Square Wave 8.0 I (Resistive−Inductive Load) PK = π IAV 6.0 4.0 TJ = 125°C 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient Figure 15. Power Dissipation http://www.kersemi.com 5 16 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX P(pk) 0.05 t2 SINGLE PULSE 0.02 0.01 0.01 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZqJC(t) t1 DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 16. Thermal Response 1000 C, CAPACITANCE (pF) 500 TJ = 25°C 200 100 50 20 10 1.0 2.0 5.0 20 10 VR, REVERSE VOLTAGE (VOLTS) 50 100 Figure 17. Typical Capacitance ORDERING INFORMATION Device MUR1510 MUR1510G MUR1515 MUR1515G MUR1520 MUR1520G MUR1540 MUR1540G MUR1560 MUR1560G Package Shipping† TO−220 TO−220 (Pb−Free) TO−220 TO−220 (Pb−Free) TO−220 TO−220 (Pb−Free) 50 Units / Rail TO−220 TO−220 (Pb−Free) TO−220 TO−220 (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://www.kersemi.com 6 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J http://onsemi.com 7 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 MUR1520/D