Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 SS12 THRU SS110 1.0AMP.SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Voltage Range 20 to 100 Volts Current 1.0Amperes FEATURES SMA ◆ For surface mounted application ◆ Easy pick and place ◆ Metal to silicon rectifier, majority carrier conduction ◆ Low power loss, high efficiency ◆ High current capability, low VF ◆ High surge current capability ◆ Plastic material used carriers Underwriters Laboratory Classification 94V-0 ◆ Epitaxial construction ◆ High temperature soldering: 260℃ / 10 seconds at terminals MECHANICAL DATA Case: molded plastic Dimensions in inches and (millimeters) Terminals: Solder plated Polarity : Indicated by cathode band Packaging: 12mm tape EIA STD RS-481 Weight: 0.074gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load current derate by 20%. Type Number SS12 SS13 SS14 SS15 SS16 SS19 SS110 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 90 100 V Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 V VDC 20 30 40 50 60 90 100 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL(See Fig. 2) IF(AV) 1.0 A IFSM 30 A Peak Forward Surge Current,8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage ([email protected] A Maximum DC Reverse Crrent @ TA=25℃ At Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note ) Operating Junction Temperature Range Storage Temperature Ranage VF IR 0.50 0.75 0.80 0.4 0.4 0.1 10.0 5.0 2.0 RQJL 28 RQJA 88 TJ -65 to +125 TSTG mA ℃/W -65 to +150 -65 to +150 V ℃ ℃ NOTE: Measured on P.C. Board with 0.2” x 0.2” (5.0mm x 5.0mm) Copper Pad Areas 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 SS12 THRU SS110 RATING AND CHARACTERISTIC CURVES SS12 THRU SS110 FIG.1-MAXIMUM NONO-REPETITIVE FORWARD SURGE FIG.2-MAXIMUM FORWARD CURRENT DERATING CURVE CURRENT NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANT ANEOUS FORWARD VOLTAGE(V) LEAD TEMPERATURE(℃) FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE(%) Note: Specifications are subject to change without notice. 2